LTC2861IGN#PBF RS-485 Interface IC 5V Full-Duplex RS485 Transceiver w/ Integrated Termination & Slew Rate Control
Features
Integrated, Logic-Selectable 120Ω Termination Resistor
n 20Mbps Max Data Rate
n No Damage or Latchup to ESD: ±15kV HBM
n High Input Impedance Supports 256 Nodes (C-, I-Grades)
n Operation Up to 105°C (LTC2859H)
n 250kbps Low-EMI Mode
n Guaranteed Failsafe Receiver Operation Over the Entire Common Mode Range
n Current Limited Drivers and Thermal Shutdown
n Delayed Micropower Shutdown (5µA Max)
n Power Up/Down Glitch-Free Driver Outputs
n Low Operating Current (900µA Max in Receive Mode)
n Meets All TIA/EIA-485-A Specifications
n Available in 10-Pin 3mm × 3mm DFN, 12-Pin 4mm × 3mm DFN and 16-Pin SSOP Packages
Description
The LTC®2859 and LTC2861 are low power, 20Mbps RS485/422 transceivers operating on 5V supplies. The receiver includes a logic-selectable 120Ω termination, one-eighth unit load supporting up to 256 nodes per bus (C-, I-grades), and a failsafe feature that guarantees a high output state under conditions of floating or shorted inputs.
Related stock models
TPS63070RNMR | original instock |
MIPSZ2012D2R2 | original in stock |
Product Category: | RS-485 Interface IC |
SMD/SMT | |
SSOP-16 | |
LTC2861 | |
Transceiver | |
20 Mb/s | |
1 Driver | |
1 Receiver | |
Full Duplex | |
5.5 V | |
4.5 V | |
0.66 mA | |
- 40 C | |
+ 85 C | |
15 kV | |
Tube | |
Input Voltage: | 5 V |
Operating Supply Voltage: | 5 V |
Product: | RS-485 Transceivers |
Product Type: | RS-485 Interface IC |
Protocol Supported: | RS-485 |
Shutdown: | Shutdown |
100 | |
Subcategory: | Interface ICs |
Type: | Low Power |
Unit Weight: | 0.027928 oz |
Company Advantages
1. We can offer products according to customer's BOM list. One stop purchase.
2. All kinds of chips, various types and complete brands.
3.More than 15years for sales original IC parts.
4. Comprehensive customer service: from customer consultation to after sales service.
5. Walton can offer sample for free , but client have to pay shipping cost. Contact us if needed.