Transmission Line Equipment Hydraulic Puller-Tensioner Equipment 140KN with Cummins Engine
Structure Parameter
Bottom diameter of tension wheel groove | 1500mm |
Trial traverse diameter | 40mm |
Total weight | 6800kg |
Boundary dimension | 4700×2300×2700mm |
Performance Parameter
Maximum intermittent tension | 140KN |
Maximum pull | 140KN |
Maximum sustained pull | 60KN |
Correspending speed | 4km/h |
Main Configuration Instructions
Engine | Cummins |
Reduction gear | German Rexroth |
Hydraulic motor | German Rexroth |
Pressure gage | German |
Pressure pump | German Rexroth |
Engine
Feeding | diesel |
Cooling system | water |
Electric system | 24V |
Product Introduction
Hydraulic puller-tensioner GX140TP designed to operate either as a tensioner and a puller, fit to string 1,2,3 or 4 ropes or conductors.
One hydraulic circuit let to tension at constant force even varying the speed of stringing.
Front oscillating conductor-driver with nylon rollers for 4 cond.
Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
Stabilisers, share and attachments for anchoring the machine.
Oil cooling system.
Four auxiliary hydraulic circuits for additional equipment.
Grounding connection point.
![]() | ![]() |
![]() | ![]() |