Cable Pulling Equipment or Transmission Line Stringing Equipment
Product Introduction
Hydraulic puller fit to pull one rope in stringing operations of overhead transmission lines.
One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.
Performance Parameter
Maximum tractive force | 90KN |
Maximum sustained traction | 80K |
Correspending speed | 2.5km/h |
Maximum sustained tractive speed | 5km/h |
Corresponding tension | 40KN |
Structure Parameter
Diameter of traction wheel | 540mm |
Slot number | 8 |
Maximum wire rope diameter | 21mm |
Allow for maximum connector diameter | 1400mm |
Total weight | 4000kg |
Dimensions of the whole machine | 4350×2250×2600mm |
Engine
Feeding | diesel |
Cooling system | water |
Electric system | 24V |
Main Configuration Instructions
Engine | cummins |
Main variable pump | German Rexroth |
The main motor, reduction gears | German Rexroth |
Tailstock motor | America Eton |
Hydraulic instrument | German |