Description China high accuracy digital densimeter fork density meter price

The tuning fork density meter is a plug-in installation, which is widely used in pipelines, open tank containers and closed tank containers for medium density detection. The fluid density directly depends on the vibration frequency received by the tuning fork in the medium inserted by the sensor. The built-in temperature sensor of the sensor provides temperature compensation for it.

Detailed Images China high accuracy digital densimeter fork density meter price

Specification China high accuracy digital densimeter fork density meter price

Feature China high accuracy digital densimeter fork density meter price

Equipped with a microprocessor-based electronic switching device that integrates signal processing, calculation and diagnostic functions. In addition to its convincing measurement accuracy and reliability, it can communicate directly with the PC through the RS485 interface. Under the ADView software environment, users can directly perform online node configuration, fault diagnosis and data logging. While measuring density and temperature, it can also calculate basic density, °API, Brix, concentration percentage, mass percentage, volume percentage, specific gravity and other parameters.

Simple installation, plug and play, maintenance-free. Can measure the density of mixed media containing solids or bubbles.

Application China high accuracy digital densimeter fork density meter price

Typical industries include, petrochemical industry, wine industry, food industry, pharmaceutical industry and mineral processing (such as

clay

, carbonate, silicate, etc.), it is specifically used for interface detection in multi-product pipelines in the above industries, density detection of agitated mixtures, reaction kettle endpoint monitoring, and separator interface detection.

The boundary effect of the wall on the fluid plus the viscosity effect of the measurement medium itself, these effects will have a certain impact on the measurement calibration of the sensor. In order to overcome these, for different environments, we have summarized and set the installation method and pipe diameter in advance to facilitate the selection under the same conditions.

In order to ensure the density meter can measure accurately and display stably, the flow rate of the medium to be measured should not be greater than 1m/s, and the diameter of the pipeline where the density meter is installed should be greater than or equal to 159mm. When the flow rate is greater than 1m/s, the diameter-expanding installation is adopted. Every time the flow rate increases by 1m, the diameter of the pipeline where the density meter is installed will be expanded by 1.5 times. It is in a laminar flow state when flowing through the fork body.

PS As shown in the picture: Horizontal pipe horizontal installation

Dimension China high accuracy digital densimeter fork density meter price

FAQ

A:We will contact you as soon as possible but within 12 hours

Q: Can I get some samples?

A: Yes, Sample order is available for quality check and market test. But you have to pay the express cost.

Q: How soon can you arrange your production?

A: Once getting your product confirmation and receiving the prepayment, the production will be started immediately.

Q: What's delivery time?

A: It usually takes about 3-5 working days for small order and 10-15 days for big order.

Q:How do you control your quality ?

A: Three inspection steps(of original, production, and finished goods) + good warranty service(1 year free to change a new one without any human damage factors).

Q: What certificates do you have ?

A:ISO9000, CE, Explosion-proof certification, RoHs ready. And before the delievry of goods, quality and safety inspection certification issued by third parts also can be offered.

Q:Could I visit your factory?

A:Very welcome! Fly to Xian Yang air port. It was a big pleasure for us.

Q: What's your warranty terms?

A: We offer 12 months warranty time.

Q:can you provide OEM & Customized service?

A:Yes, OEM and ODM are both available, we have the professional R&D dept which can provide professional solutions for you.