Flow Meter Price China Water Electromagnetic Flow Meter Inline Liquid Flow Meter
Description Flow Meter Price China Water Electromagnetic Flow Meter Inline Liquid Flow Meter
Electromagnetic Flowmeters (EMF for short) is a new type of flow measuring instrument developed rapidly with the development of electronic technology in the 1950s and 1960s. Electromagnetic flowmeter is an instrument that uses the principle of electromagnetic induction to measure the flow of conductive fluid according to the electromotive force induced by the conductive fluid passing through an external magnetic field.
Specification Flow Meter Price China Water Electromagnetic Flow Meter Inline Liquid Flow Meter
Nominal diameter | DN10-DN2000 |
Nominal pressure | 0.6 ~ 70MPa |
Accuracy | 0.5 or 1.0 |
Installation mode | Flange mounting, flange holder is optional |
Ambient temperature | -25℃~+60℃ |
Medium temperature | Split type chloroprene rubber lining, polyurethane lining: -10℃~+8℃ PTFE,PFA, F46 lining:-10℃~+160℃, Integrated type: -10℃~+80℃ |
Medium conductivity | >5μs/cm |
Min flow rate measurement | 0.1m/s |
Max flow rate measurement | 15m/s |
Range ratio | 1:20,or custom |
Output signal | Pulse /4-20mA (load resistor 0-750) |
Power supply | 220VAC, tolerance 15% or +24 VDC, ripple ≤ 5% |
Communication Interface | Optional RS485/RS232 |
Protocol | MODBUS,HART,Profibus,etc |
Measurement pipe (lining) material | Chloroprene rubber, polyurethane, PTFE, PFA, F46 and other decay resistant materials |
Measurement element (electrode) material | 316L stainless steel, titanium alloy, Hastelloy alloy, tantalum alloy |
Explosion-proof grade | Exd[ia]qIICT5/ ExmbⅡT4 |
Features Flow Meter Price China Water Electromagnetic Flow Meter Inline Liquid Flow Meter
1. The measurement is not affected by changes in fluid density, viscosity, temperature, pressure and conductivity;
2. There are no obstructing flow parts in the measuring tube, no pressure loss, and low requirements for straight pipe sections. Unique adaptability to slurry measurement;
3. Reasonable selection of sensor lining and electrode materials, that is, good corrosion resistance and wear resistance;
4. The converter adopts a novel excitation method, with low power consumption, stable zero point and high accuracy. The flow range can reach 150:1;
5. The converter can be integrated or separated with the sensor;
6. The converter adopts 16-bit high-performance microprocessor, 2x16LCD display, convenient parameter setting and reliable programming;
7. The flowmeter is a two-way measurement system with three built-in totalizers: forward total, reverse total and difference total; it can display forward and reverse flow, and has a variety of outputs: current, pulse, digital communication , HART;
8. The converter adopts surface mount technology (SMT), with self-test and self-diagnosis functions;
9. The measurement accuracy is not affected by changes in fluid density, viscosity, temperature, pressure and conductivity. The sensor induced voltage signal has a linear relationship with the average flow rate, so the measurement accuracy is high.
10. There is no obstruction in the measurement pipeline, so there is no additional pressure loss; there are no moving parts in the measurement pipeline, so the sensor has a very long life.
11. Since the induced voltage signal is formed in the entire space filled with magnetic field and is the average value on the pipeline surface, the straight pipe section required by the sensor is short, and the length is 5 times the pipe diameter.
12. The converter adopts the latest and most advanced single chip microcomputer (MCU) and surface mount technology (SMT) in the world, with reliable performance, high precision, low power consumption, stable zero point and convenient parameter setting. Click on the Chinese display LCD to display the cumulative flow, instantaneous flow, flow rate, flow percentage, etc.
13. Two-way measurement system, which can measure forward flow and reverse flow. The use of special production technology and high-quality materials ensures that the performance of the product remains stable for a long time.