Anolog Air -60-60pa Differential Pressure Gauge
Description Anolog Air -60-60pa Differential Pressure Gauge
Differential pressure measurement between clean rooms Differential pressure measurement of clean room and clean workshop Negative pressure measurement of furnace chamber Pressure measurement of inlet and outlet of supply and induced draft fans Differential pressure measurement before and after high, medium and low efficiency filters
Uses: special instrument for GMP certification in the pharmaceutical industry; used to measure the positive and negative pressure difference of clean rooms in pharmaceutical factories and electronic factories, special meters for HVAC, purification air conditioners, purification typhoon shower rooms, and detection of pressure difference of clean air conditioner filters, etc.
Parameter Anolog Air -60-60pa Differential Pressure Gauge
Medium: | air and non-combustible, compatible gases (optional gas) |
Housing: | cast aluminum housing or ABS shell, glass beveled panels. Dark gray coating, can withstand 168 hours salt spray test |
Accuracy: | 2% FS (mm units, and the range with the corresponding pa) |
Pressure range:. | -20Hg To 15 psig (-0.677 bar to 1.034 bar) |
Temperature range: | 20 to 140 ° F (-6.67 to 60 ° C) |
Hole size: | 114mm |
Mounting Orientation: | Diaphragm in vertical |
Connections: | same 1/8 "NPT high and low pressure fittings, one pair on the side, one pair in the back |
Weight: | 500g / only |
Standard accessories: | two 1/8 "NPT threaded connectors for high and low pressure fittings can be connected with a rubber tube; two 1/8" NPT plug for blocking the remaining two high and low pressure ports; three a threaded countersunk mounting coupling (mounting ring, according to buckle holder for three interfaces to replace MP and count on attachments HP) |
Features Anolog Air -60-60pa Differential Pressure Gauge