FS flow switch is suitable for monitoring the fluid flow rate and interruption in the pipeline to prevent the idling of the pump. Real-time monitoring of the liquid flow in the pipeline, providing switch output, 6 LEDs real-time display of the fluid state can achieve the following monitoring functions: medium reduction/increase flow rate; medium presence/absence; medium flow/still. When the water flow is higher or lower than a certain set point, the output alarm signal is triggered and transmitted to the unit, and the system can make corresponding indication actions after obtaining the signal. Avoid or reduce host "dry burn". It is widely used in petrochemical, power metallurgy, steel mills, papermaking, food processing, water treatment, battery factories and other industries.
Pressure Range | Water: 0.03~3m/s Oil: 0.06~6m/s Gas: 2~30m/s |
Contact capacity: | 1A/125VAC2A/30VDC |
Pressure resistance: | 4MPa high pressure type 60MPa |
Insulation resistance: | 100MQ at 100VDC |
Connection method: | G1/2, G1/4 thread can be customized |
Product material: | 304 stainless steel |
Switching time: | ON: Typical 2s(~13s) OFF: Typical 2s(1~15s) |
Measuring range: | liquid 0.03~3m/s |
Temperature change response time: | ≤12s |
Connection line: | Air plug lead 2 meters (standard) |
Working voltage: | DC24V, AC24VAC/DC220V |
Display mode: | LED lights (6) |
Power consumption: | 3W(24VDC) 5W(220VAC/DC) |
Working temperature: | -10°℃~80℃ |
Output signal: | relay, NPNPNP signal |
Protection class | IP67 |
Anti-corrosion and anti-rust, low anti-fouling resistance
The probe can be customized with anti-structure coating,
Induction probe, small water resistance, small flow loss, small flow loss
Full potting, dustproof and waterproof
Anti-low temperature condensation and frost
IP67 protection class up to short-term immersion in liquids
Built-in temperature compensation circuit
Guaranteed liquid temperature resistance up to 80°C
-20°C~80°C has higher temperature resistance than ordinary electronic flow switches. When changing, the setpoint will not drift.
Company Information 12V 220v flow switch water for pump