EJA530A Smart Pressure Transmitter Direct Installation Communication Supply
Product Overview:
The Yokogawa EJA530A intelligent pressure transmitter is a high-performance intelligent pressure transmitter (direct mount type) that utilizes the single crystal silicon resonant sensor technology developed by Yokogawa Electric Corporation in Japan. The EJA530A pressure transmitter is used to measure the pressure of liquids, gases, or vapors and convert it into a 4-20mA DC current signal output. EJA510A and EJA530 can also be used with BRAINTM manual operators The CENTUMCSTM, uXLT, and HART8275 manual operators communicate to achieve remote setting, monitoring, and other functions.
Key attributes Other attributes:
place of origin | Japan |
warranty | 1 Year |
Yokogawa | |
model number | EJA530A |
material | AL |
Capsule: | DL,DM,DH,DV,EL,EM,EH,EV |
Protocol: | BRAIN or HART |
Media: | liquid, gas, or steam flow |
Accuracy: | 0.065% of span |
Supply: | 10.5 to 42V DC |
Output: | 4 to 20 mA DC |
MWP: | 16Mpa |
Measuring Span: | 0.5 to 10 KPa ,1 to 100 KPa,5 to 500 |
Product | smart pressure transmitter transmitter Yokogawa EJA530A |
Output signal | 4~20mA |
Specifications:
EJA530A pressure transmitter |
|||||
L Capsule |
M Capsule |
H Capsule |
V Capsule |
||
Differential pressure span |
0.5 to 10 kPa {50 to 1000 mmH2O} {2 to 40 inH2O} {5 to 100 mbar} |
1 to 100 kPa {100 to 10000 mmH2O} {4 to 400 inH2O} {10 to 1000 mbar} |
5 to 500 kPa { 0.05 to 5 kgf/cm2} {20 to 2000 inH2O} {50 to 5000 mbar} |
0.14 to 14 MPa { 1.4 to 140 kgf/cm2}*1 {20 to 2000 psi} {1.4 to 140 bar} |
|
Accuracy |
±0.065 % |
±0.065 % |
±0.065 % |
±0.065 % |
|
Degrees of protection |
IP67, NEMA 4X, and JIS C0920 immersion proof |
||||
Certificates |
FM, CENELEC ATEX, CSA, TIIS, IECEx |
||||
Output |
4 to 20 mA DC or FOUNDATION fieldbus or PROFIBUS PA 2-wire system with digital communication |
||||
Supply voltage |
BRAIN and HART:10.5 to 42 V DC (10.5 to 30 V DC for Intrinsically safe type) Fieldbus:9 to 32 V DC (9 to 24 V DC for Entity model and 9 to 17.5 V DC for FISCO model) |
||||
Ambient temperature |
-40 to 85 deg C (-40 to 185 deg F) (general use type) -30 to 80 deg C (-22 to 176 deg F) (with integral indicator) |
||||
Process temperature |
-40 to 120 deg C (-40 to 248 deg F) (general use type) |
||||
Maximum working pressure |
3.5 MPa (500 psi) |
16 MPa (2300 psi) |
|||
Mounting |
2-inch pipe mounting |
||||
Wetted parts material |
Capsule |
Hastelloy C-276, Monel, Tantalum |
|||
Bolts and nuts material |
SCM435,SUS630,SUH660 |
||||
Mounting bracket |
SECC Carbon steel, SUS304, SUS316, |