CWDZ20Y Plug-In Temperature Transmitter Ventilation Duct Temperature Control HVAC Measuring Range -50~100℃
CWDZ20Y plug-in temperature transmitter is carefully designed and of excellent quality, suitable for monitoring the temperature of various pipelines or boxes, with and without display options, and cost-effective.
Base parameters | |
Measuring medium | gas |
Measuring range | -50~100℃ |
Measuring cell | 1*Pt100(1/3B grade) |
Response time | 18s (according to IEC60751, 0.4m/s wind speed, 10°C step) |
Stable performance | ± 0.1% FS/year |
On-time | 400ms |
Degree of protection | IP65 |
Overall weight | With display ≈ 190g, no display ≈ 170g |
Accuracy class | 0.25%FS,0.5%FS |
Output power | |
Output signal | 4~20mA,RS485,PT100,0~10VDC,0~5VDC,1~5VDC |
Power supply range | 9~36VDC,12~36VDC |
Maximum power | |
4~20mA | ≤0.02Us(W) |
RS485 | ≤0.015Us(W) |
0~10VDC | ≤0.015Us(W) |
0~5VDC | ≤0.015Us(W) |
1~5VDC | ≤0.015Us(W) |
Load characteristics | |
Voltage type | ≥10kΩ |
Current type | ≤{(Us-7.5)÷0.02}Ω(Us=Supply voltage) |
Environmental conditions | |
Ambient temperature | -40~85℃ |
Ambient humidity | 0%~95%RH(no condensation, no condensation) |
Electrical protection | |
Short-circuit protection | perpetual |
Anti-polarity protection | No damage, but not working |
Insulation resistance | ≥100MΩ,500VDC |
Dielectric strength | 500VAC |
Output limits | |
4-20mA | Output min. 4mA and output max 20mA |
RS485 | Output minimum 0, output maximum 1500 |
0~10VDC | Output minimum 0.001VDC, output maximum 10VDC |
0~5VDC | Output minimum 0.001VDC, output maximum 5VDC |
1~5VDC | Output minimum 0.001VDC, output maximum 5VDC |
Overall material | |
enclosure | ABS engineering plastics |
Cable locking head | Nylon (lock wire diameter 4~6mm) |
display | LCD display without backlight |
Protective tube | 304 stainless steel contacts the medium to be measured |
Seals | Nitrile rubber comes into contact with the medium to be measured |
Installation flange | ABS engineering plastics come into contact with the measured medium |
Mechanical stability | |
Seismic performance | 10g(20… 2000Hz) in accordance with IEC60068-2-6 standard |