CYW16Y Deep Well Type Submersible Level Transmitter Liquid Level Range 0~200~500~1000~2000mH2O Temperature Range-40~100°C
The CYW16Y deep well type submersible level transmitter is independently designed for deep well measurement applications. It has the advantages of small temperature drift coefficient, high precision, wear resistance and anti-pulling of the cable. With double isolation cavity, customers can connect the cable by themselves for easy use.
Base parameters | |
Measuring medium | Water (H2O) or liquids compatible with contact materials |
Measuring range | 0~200~500~1000~2000mH2O |
Temperature range: | -40~100℃(±2℃) |
Media temperature: | -40~100°C (factory with wire)/-40~60°C (self-wiring, depending on packaging process) |
Pressure mode: | Sealing pressure (S) |
Response frequency: | Analog signal output≤ 50Hz |
Stable performance: | ± 0.1% FS/year |
Accuracy class: | 0.1%FS Note: Reference conditions: temperature 15~25°C, atmospheric pressure 86~106kPa, humidity 45~75%RH. |
Supply voltage: | 9~36VDC |
Signal output: | 4~20mA,4~12~20mA |
Temperature compensation: | -40~85℃ |
Overload capacity: | 200% full scale |
Temperature drift: | ±0.01%FS/°C (temperature compensation range) ±0.05%FS/°C (outside temperature compensation range) |
Degree of protection | IP68 |
Overall weight | Probe≈ 650g Cable ≈ 110g per meter |
On-time | 400ms |
Maximum power | ≤0.02Us(W) Note: Us=Supply voltage. |
Load characteristics | |
Current type | Load ≤{(Us-7.5)÷0.02}Ω (US=Supply voltage) |
Environmental conditions | |
Ambient temperature | -40~100℃ |
Overall material | |
Diaphragm | 316L stainless steel (contact with the medium to be measured) |
Outer shell | 316L stainless steel (contact with the medium to be measured) |
Seals | Fluorine glue (without cable, contact with the medium to be measured) |
Seals | Fluorine glue (contact with the medium to be measured) |
Cable | Polyethylene φ7.8 steel wire layer cable (contact with the measured medium) |
Mechanical stability | |
Seismic performance | 10g(20… 2000Hz) conforms to IEC60068-2-6 standard |
Impact resistance | 500g/ms conforms to IEC60068-2-27 standard |
Electrical protection | |
Short-circuit protection | perpetual |
Anti-polarity protection | No damage, but not working |
Insulation resistance | ≥100MΩ,500VDC |
Dielectric strength | 500VAC |
Output limits | |
4-20mA | 4~20mA |