CYYZ12Y High Frequency Response Pressure Transmitter General Industry Range 0~0.02~20MPa Accuracy 0.25%FS
CYYZ12Y high-frequency response pressure transmitter, its response frequency can reach 2kHz, can meet some high-frequency response scenes, and cost-effective. In addition, we can provide customized products to meet the needs of customers in a short period of time, depending on their application.
Base parameters | |
Measuring medium | Liquid or gas (compatible with contact material) |
Measuring range | 0~0.02~20MPa (see range selection table for details) |
Type of pressure | Gauge pressure, absolute pressure, sealing pressure |
Accuracy class | 0.25%FS |
Response frequency | 2kHz |
Media temperature | -40℃~100℃ |
On-time | 20ms |
Stable performance | ± 0.1% FS/year |
Temperature compensation | -40~80℃ |
Temperature drift | ±0.01%FS/°C (temperature compensation range) ±0.05%FS/°C (outside temperature compensation range) |
Degree of protection | IP65 |
Durable performance | 10X10⁶ times (lower range to upper range cycles) |
Overall weight | ≈170g |
Power supply range | 9~32VDC,13~32VDC |
Output signal | 4~20mA,0~10VDC |
Maximum power | |
Current type | ≤0.02Us(W) |
Voltage type | ≤0.005Us(W) |
Load characteristics | |
Current type | Load ≤{(US-8)÷0.02}Ω (US=Supply voltage) |
Voltage type | ≥5kΩ |
Environmental conditions | |
Ambient temperature | -40~85℃ |
Ambient humidity | 0%~95%RH(no condensation, no condensation) |
Overload capacity | |
Overload pressure | 300%FS,200%FS,150%FS |
Burst pressure | 600%FS,500%FS,400%FS |
Overall material | |
diaphragm | 316L stainless steel (contact) |
Process connection | 304 stainless steel (contact) |
enclosure | 304 stainless steel (contact) |
Seals | Nitrile rubber (contact) (seen pressure and blasting chart (contact with the medium to be measured) |
Hirschmann joints | ABS engineering plastics |
Mechanical stability | |
Seismic performance | 10g(20… 2000Hz) |
Impact resistance: | 500g/ms |
Electrical protection | |
Short-circuit protection | perpetual |
Anti-polarity protection | No damage, but not working |
Insulation resistance | ≥100MΩ500VDC |
Dielectric strength: | 500VAC |
Output limits | |
The output is minimal | 3.2mA,-1.2VDC |
Output maximum | 22.3mA,11.2VDC |