CYYZ16AY High Temperature Pressure Transmitter Range -100kPa~0~100MPa Accuracy 0.1%FS 0.25%FS 0.5%FS General Industry
The CYYZ16AY pressure transmitter is not only compact, but also of excellent quality, suitable for measuring high-temperature liquids or gases, and cost-effective. It also has diversified advantages such as output signal, range range, pressure interface, electrical connection, etc., which is convenient to match different working conditions.
Base parameters | |
Measuring medium | Liquid or gas (compatible with contact material) range< 10 kPa (non-conductor, non-corrosive, non-explosive gas with humidity ≤90%RH, no condensation) |
Measuring range | -100kPa~0~100MPa (see range selection table for details) |
Pressure mode | Gauge pressure, absolute pressure, negative pressure |
Media temperature | -40~150℃ |
On-time | 20ms |
Stable performance | ± 0.1% FS/year |
Temperature drift | ±0.01%FS/°C (temperature compensation range) ±0.05%FS/°C (outside temperature compensation range) |
Degree of protection | IP65 (no display) IP54 (with display) Note: The above protection level refers to the electrical connection is complete |
Durable performance | 10X10⁶ times (lower range to upper range cycles) |
Overall weight | No display≈ 320g Yes≈360g |
resolution | Analog output 0.01%FS, digital output 0.05%FS |
Output power supply: | |
Output signal | 4~20mA,RS485,0~10VDC,0~5VDC,1~5VDC,0.5~2.5VDC |
Power supply range | 9~36VDC,15~36VDC,3~5VDC |
Accuracy class | 0.1%FS,0.25%FS,0.5%FS |
Response frequency | 5Hz,30Hz,100Hz |
Maximum power: | |
Current type | ≤0.02Us(W) |
Voltage type | ≤0.02Us(W),≤0.008Us(W) ,≤0.001Us(W) |
Digital | ≤0.02Us(W),≤0.015Us(W) |
Load characteristics: | |
Voltage type | ≥10kΩ |
Current type | No display load ≤ {(Us-7.5)÷0.02}Ω (Us=Supply voltage) Display load ≤{(Us-12)÷0.02}Ω (US=Supply voltage) |
Environmental conditions: | |
Ambient temperature | -40~85℃ |
Ambient humidity | 0%~95%RH(no condensation, no condensation) |
Overpressure and blasting | 600%FS,500%FS,400%FS,300%FS,20kPa,200kPa,600kPa,900kPa,1.25MPa,2MPa,3MPa,5MPa,9MPa,12.5MPa |
Overall material: | |
diaphragm | 316L stainless steel (contact with the medium to be measured) |
Process connection | 304 stainless steel (contact with the medium to be measured) |
enclosure | 304 stainless steel |
Seals | Seen pressure and blasting charts (contact with the medium being measured) |
Hirschmann joints | ABS engineering plastics, |
Display the shell | ABS Engineering Plastics (LED Display) |
Hirschmann joints | ABS engineering plastics |
Mechanical stability: | |
Seismic performance | 10g(20… 2000Hz) conforms to IEC60068-2-6 standard |
Impact resistance | 500g/ms conforms to IEC60068-2-27 standard |
Electrical protection: | |
Short-circuit protection | perpetual |
Anti-polarity protection | No damage, but not working |
Insulation resistance | ≥100MΩ 500VDC |
Dielectric strength | 500VAC |
Output Limits: | |
The output is minimal | 4mA,3.8mA,0,0.001VDC,0.05VDC |
Output maximum | 20mA,26mA,2000,12VDC,10VDC,5VDC |