CYW81CY Hydrostatic Oil Level Transmitter Measuring Range 0~5~30kPa Oil Level Measurement Site Such As Fuel Tanks Tanks
CYW81CY hydrostatic oil level transmitter, its wetted part is made of stainless steel and integral laser welding process, so that it has excellent oil resistance. Ideal for measuring tank and tank levels, and cost-effective.
Base parameters | |
Measuring medium | Liquids such as oil that are compatible with contact materials |
Measuring range | 0~5~30kPa |
Pressure mode | Gauge pressure |
Media temperature | -40~100℃ |
Response frequency | Analog output≤ 30Hz, digital output≤5Hz |
Stable performance | ± 0.1% FS/year |
Overload capacity | 200% full scale |
Temperature drift | ±0.01%FS/°C (temperature compensation range) ±0.05%FS/°C (outside temperature compensation range) |
Ex type | Intrinsically Safe Ex ia II.C T6 Ga Note: Intrinsically safe must be powered by a safety barrier or intrinsically safe power supply |
Degree of protection | Probe IP68, junction box IP66. Note: The above protection level refers to the electrical connection after it is complete |
On-time | 20ms |
resolution | Analog output 0.01%FS, digital output 0.05%FS |
Output power | |
Output signal | 4~20mA,RS485,0~10VDC,0~5VDC,1~5VDC |
Power supply range | 9~32VDC,15~32VDC,15~24VDC |
Accuracy class | 0.25%FS,0.5%FS |
Power range | |
Current type | ≤0.02Us(W) |
Digital | ≤0.015Us(W) |
Voltage type | ≤0.008Us(W) |
Power range | |
4~20mA | Yes/No Display≤0.02Us(W) |
RS485 | With display ≤0.02Us(W), no display ≤0.015Us(W) |
0~10VDC | Yes≤0.02Us(W), No display≤0.008Us(W) |
0~5VDC | Yes≤0.02Us(W), No display≤0.008Us(W) |
1~5VDC | Yes≤0.02Us(W), No display≤0.008Us(W) |
Output power | |
Voltage type | ≥10kΩ |
Current type | Current type load ≤{(Us-7.5)÷0.02(Us=Supply voltage 2)}Ω |
Environmental conditions | |
Ambient temperature | -40~85℃ |
Ambient humidity | 0%~95%RH(no condensation, no condensation) |
Overall material | |
diaphragm | 316L stainless steel (contact) |
Probes | 304 stainless steel (contact) |
Junction box | Die-cast aluminum |
Sealed | Laser welding (contact with the medium to be measured) |
Display window | ≈ 6mm explosion-proof glass |
Mechanical stability | |
Seismic performance | 10g(20… 2000Hz) conforms to IEC60068-2-6 standard |
Impact resistance | 500g/ms conforms to IEC60068-2-27 standard |
Electrical protection | |
Short-circuit protection | perpetual |
Anti-polarity protection | No damage, but not working |
Insulation resistance | ≥100MΩ,500VDC |
Dielectric strength | 500VAC |
Output limits | |
4-20mA | 4mA~20mA |
RS485 | 0~2000 |
0~10VDC | 0.001VDC~10VDC |
0~5VDC | 0.001VDC~5VDC |
1~5VDC | 0.001VDC~5VDC |