CYYZ36AY Mud Type Pressure Transmitter Range 0~1MPa~110MPa Accuracy 0.5%FS Construction Machinery Cement Grout
CYYZ36AY mud type pressure transmitter has careful design, compact structure, anti-vibration, frequent high-pressure impact, solid sand impact, and wear resistance, and is suitable for the measurement of mud, crude oil, wet soil and other media.
Base parameters | |
Measuring medium | Slurry, crude oil, wet soil, etc. (compatible with contact materials) |
Measuring range | 0~1MPa~110MPa (see range selection table for details) |
Type of pressure | Gauge pressure |
Temperature compensation | -10~70℃ |
Accuracy class | 0.5%FS |
Response frequency | 5Hz,100Hz |
Stable performance | ± 0.1% FS/year |
Temperature drift | ±0.01%FS/°C (temperature compensation range) ±0.05%FS/°C (outside temperature compensation range) |
Overall weight | ≈650g (including 5m cable) |
resolution | Analog output 0.01%FS, digital output 0.05%FS |
Degree of protection | IP67 |
Output power | |
Output signal | 4~20mA,RS485 |
Power supply range | 9~36VDC |
Power range | |
Current type | ≤0.02Us(W) |
Digital | ≤0.015Us(W) |
Load characteristics | |
Current type | ≤{(Us-7.5)÷0.02(Us=Supply voltage)}Ω |
Environmental conditions | |
Media temperature | -40~85℃ |
Ambient temperature | -40~85℃ |
Ambient humidity | 0%~95%RH(no condensation, no condensation) |
Overload capacity | |
Overload pressure | 200%,150%FS |
Burst pressure | 400%,300%FS |
Overall material | |
diaphragm | 316L stainless steel (contact with the medium to be measured) |
Process connection | 316L stainless steel (contact with the medium to be measured) |
enclosure | 316L stainless steel (contact) |
Seals | Fluoroelastomer Seen pressure and blasting charts (contact with the medium being measured) |
Cable | Cable: φ5mm polyurethane shielded cable (UV protection) |
Mechanical stability | |
Seismic performance | 10g(20… 2000Hz) conforms to IEC60068-2-6 standard |
Impact resistance: | 500g/ms conforms to IEC60068-2-27 standard |
Electrical protection | |
Short-circuit protection | perpetual |
Anti-polarity protection | No damage, but not working |
Insulation resistance | ≥100MΩ500VDC |
Dielectric strength: | 500VAC |
Output limits | |
The output is minimal | 3.8mA,0 |
Output maximum | 26mA,2000 |