CYYZ51EY Flat Diaphragm Type Pressure Transmitter Range -0.1~0~60MPa Accuracy 0.25%FS 0.5%FS mixed polluting media
CYYZ51EY flat film type pressure transmitter is designed for measuring adhesion, crystallization, and mixing It was born by contaminating and other media. The flat membrane design is adopted, which effectively prevents the plugging of the impulse hole Stop up. The process connection is sealed at the lower end of the thread, so that the measuring medium and the connection thread part are connected Effective isolation, avoiding adhesion and mixed contamination of threaded connections. Optional intrinsically safe explosion-proof. It also has output signals, measuring ranges, pressure interfaces, electrical connections, and more It is convenient to match different working conditions.
Basic parameters | |
Measuring medium | Liquids, fluids, gases (compatible with contact materials) |
Measuring range | -0.1~0~60MPa (see range selection table for details) |
Type of pressure | Gauge pressure, absolute pressure, negative pressure |
Temperature compensation | -10~70℃ |
Accuracy class | 0.25%FS,0.5%FS |
Frequency of response | 5,30Hajj100Hajj |
Stable performance | ±0.1% FS/year |
Temperature drift | ±0.01%FS/°C (within temperature compensation)±0.05%FS/°C (outside temperature compensation) |
Overall weight | No display ≈ 190g with display ≈ 270g |
Ingress protection | IP65 (no display) IP54 (display) Note: The above protection level refers to the completion of the electrical connection |
Output power | |
Output signal | 4~20mA,RS485,0~10VDC,0~5VDC,1~5VDC,0.5~2.5VDC |
Power supply range | 9~28VDC,15~28VDC,3~5VDC,15~24VDC |
Power range | |
Voltage type | ≤0.02Us(W),≤0.008Us(W),≤0.001Us(W) |
Current type | ≤0.02Us(W) |
Digital | ≤0.02Us(W),≤0.015Us(W) |
Load characteristics | |
Voltage type | ≥10kΩ |
Current type | No display load ≤{(Us-7.5)÷0.02}Ω With display load≤{(Us-12)÷0.02}Ω (Us=supply voltage) |
Environmental conditions | |
Medium temperature | -40~85℃ |
Ambient temperature | -40~85℃ |
Ambient humidity | 0%~95%RH(无冷凝无结露) |
Overload capacity | |
Overload pressure | 300%FS,200%FS,12kPa,50kPa,300kPa,480kPa,750kPa,800kPa,1.2MPa,2MPa |
Burst pressure | 600%FS,500%FS,400%FS,20kPa,200kPa,600kPa,900kPa,1.25MPa,2MPa,3MPa,5MPa,2MPa,3MPa,5MPa |
Overall material | |
diaphragm | 316L stainless steel (in contact with the medium to be measured) |
Process connections | 316 stainless steel (in contact with the medium to be measured) |
enclosure | 304 stainless steel |
O-rings | Nitrile rubber (contact with the medium to be measured) |
ED CIRCLE | Nitrile rubber (contact with the medium to be measured) |
Displays the shell | ABS Engineering Plastics (LED Display) |
Hersmann connectors | ABS engineering plastics |
Mechanical stability | |
Vibration resistance | 10g(20… 2000Hz) in accordance with IEC60068-2-6 standard |
Impact Resistance: | 500g/ms meets IEC60068-2-27 standard |
Electrical protection | |
Short-circuit protection | eternity |
Anti-polarity protection | No damage, but no work |
Insulation resistance | ≥100MΩ500VDC |
Dielectric Strength: | 500VAC |
Output limits | |
The output is minimal | 4mA,0,0.001VDC,0.05VDC |
The output is maximum | 20mA,2000,10VDC,5VDC |