CYYZ65CY Hygienic Pressure Transmitter Pressure Range -0.1~0~4MPa Explosion-Proof Food And Beverage Industry
CYYZ65CY pressure transmitter is suitable for hygienic application sites, and the wetted part and diaphragm are made of 316L material and laser welding leveling process, which meets the application requirements of the hygienic industry. And with a variety of explosion-proof function options, intrinsically safe explosion-proof, isolation explosion-proof, intrinsically safe dust explosion-proof, and can also choose HART protocol communication, cost-effective. It also has diversified advantages such as output signal, range and pressure interface, which is convenient to match different working conditions.
Basic parameters | ||||||||||
Measuring medium | Liquids, fluids, gases (compatible with contact materials) | |||||||||
Pressure range | -0.1~0~4MPa (see range selection table for details) | |||||||||
Pressure mode | Gauge | |||||||||
Medium temperature | -40~130℃ | |||||||||
Connection time | 20ms | |||||||||
Stable performance | ±0.1% FS/year | |||||||||
Temperature drift | ±0.01%FS/℃ (within temperature compensation range) ±0.05%FS/℃ (outside temperature compensation range) | |||||||||
Explosion-proof type | Flameproof type Ex d Ⅱ C T6 Gb Intrinsically safe type Ex ia Ⅱ C T6 Ga (only 4~20mA/4~20mA HART output) Dust intrinsically safe type Ex iaD 20 T80℃ (only 4~20mA/4~20mA HART output) Note: Intrinsically safe must be powered by a safety barrier or intrinsically safe power supply | |||||||||
Protection level | IP66 Note: The above protection level refers to the level achieved after the electrical connection is complete. | |||||||||
Durable performance | 10X10⁶ times (number of cycles from lower limit to upper limit) | |||||||||
Response frequency | Analog signal output ≤30Hz Digital signal output ≤5Hz HART communication ≤10Hz | |||||||||
Overall weight | No display ≈ 1.25kg With display ≈ 1.4kg | |||||||||
Resolution | Analog output 0.01%FS, digital output 0.05%FS | |||||||||
Output power supply | ||||||||||
Power supply range | 9~32VDC,13~32VDC,15~32VDC,15~24VDC | |||||||||
Current Type | ≤0.02Us(W) | |||||||||
Load characteristics | ||||||||||
Current Type | No display load ≤ {(Us-7.5) ÷ 0.02} Ω Display load ≤ {(Us-12) ÷ 0.02} Ω (Us = supply voltage) | |||||||||
HART Current Type | Load ≤{(Us-12)÷0.02}Ω (Us=supply voltage) | |||||||||
Environmental conditions | ||||||||||
Ambient temperature | -40~85℃ | |||||||||
environment humidity | Relative 0%~95% (no condensation and no condensation) | |||||||||
Overall material | ||||||||||
Diaphragm | 316L stainless steel (contacting the measured medium) | |||||||||
Process connection | 316L stainless steel (contacting the measured medium) | |||||||||
shell | Die-cast aluminum | |||||||||
Seals | See the pressure and burst chart (contact with the measured medium) | |||||||||
Display window | ≈6mm explosion-proof glass | |||||||||
Mechanical stability | ||||||||||
Vibration resistance | 10g (20…2000Hz) in accordance with IEC60068-2-6 standard | |||||||||
Impact resistance | 500g/ms Comply with IEC60068-2-27 standard | |||||||||
Electrical protection | ||||||||||
Short circuit protection | permanent | |||||||||
Reverse polarity protection | No damage, but not working | |||||||||
Insulation resistance | ≥100MΩ 500VDC | |||||||||
Dielectric strength | 500VAC |