The CYYZ95Y pressure transmitter has a low profile and excellent quality, which is very suitable for installation sites where space is required and is cost-effective. It also has diversified advantages such as output signal, range and pressure interface, which is convenient to match different working conditions.
Base parameters | |
Measuring medium | Liquid or gas (compatible with contact material) range< 10 kPa (non-conductor, non-corrosive, non-explosive gas with humidity ≤90%RH, no condensation) |
Measuring range | -100kPa~0~100MPa (see range selection table for details) |
Pressure mode | Gauge pressure, absolute pressure, negative pressure |
Media temperature | -40~85℃ |
On-time | 20ms |
Stable performance | ± 0.1% FS/year |
Temperature drift | ±0.01%FS/℃,±0.05%FS/℃ |
Degree of protection | IP65 |
Durable performance | 1X10⁶ times (lower range to upper range number of cycles) |
Overall weight | ≈260g |
resolution | Analog output 0.01%FS, digital output 0.05%FS |
Output power | |
Output signal | 4~20mA,RS485,0~10VDC,0~5VDC,1~5VDC,0.5~2.5VDC |
Power supply range | 9~36VDC,15~36VDC,3~5VDC |
Accuracy class | 0.1%FS,0.25%FS,0.5%FS |
Response frequency | 5Hz,30Hz,100Hz |
Power range | |
Current type | ≤0.02Us(W) |
Digital | ≤0.015Us(W) |
Voltage type | ≤0.008Us(W),≤0.001Us(W) |
Load characteristics | |
Voltage type | ≥10kΩ |
Current type | Current type load ≤{(Us-7.5)÷0.02(Us=Supply voltage 2)}Ω |
Environmental conditions | |
Ambient temperature | -40~85℃ |
Ambient humidity | 0%~95%RH(no condensation, no condensation) |
Overpressure and blasting | |
Overload pressure | 300%FS,200%FS,150%FS,12kPa,50kPa,300kPa,480kPa,750kPa,800kPa,1.2MPa,2MPa,3MPa,5MPa |
Burst pressure | 600%FS,500%FS,400%FS,300%FS,20kPa,200kPa,600kPa,900kPa,1.25MPa,2MPa,3MPa,5MPa,9MPa,12.5MPa |
Overall material | |
diaphragm | 316L stainless steel (contact) |
Process connection | 304 stainless steel (contact) |
enclosure | 304 stainless steel (contact) |
Seals | Nitrile rubber, fluoroelastomer (contact with the measured medium) |
Cable material | φ3.2 polyurethane cable |
Mechanical stability | |
Seismic performance | 10g(20… 2000Hz) |
Impact resistance: | 500g/ms |
Electrical protection | |
Short-circuit protection | perpetual |
Anti-polarity protection | No damage, but not working |
Insulation resistance | ≥100MΩ500VDC |
Dielectric strength: | 500VAC |
Output limits | |
The output is minimal | 3.8mA,4mA,0,0.001VDC,0.05VDC |
Output maximum | 20mA,26mA,2000,10VDC,5VDC,12VDC |