YBNJ12Y Shaft Dynamic Torque Sensor Adopts German Technology And Production Equipment And Advanced Testing Equipment
YBNJ12Y shaft dynamic torque transducer adopts German technology and production equipment and advanced testing equipment. Both ends are keyed connections. Compact structure, easy to handle and install. It has the characteristics of high precision, stable and reliable performance, wide test range and high cost performance.
Basic parameters | |
Rated torque | 500~5000Nm |
Accuracy level | 0.5%FS Relative repeatability error ±0.02% when the installation position is unchanged |
temperature drift | ±0.2%FS/10℃ (reference temperature 23℃) |
Maximum power consumption | ≤70mA |
Maximum working torque | 150%FS |
Maximum ultimate torque | 200%FS |
Breaking torque | >300%FS |
Protection level | IP50 |
environmental conditions | |
ambient temperature | -10~60℃ |
environment humidity | 0%~95%RH (no condensation, no condensation) |
overall material | |
shell | 6061 aluminum |
axis | 17-4PH stainless steel |
mechanical stability | |
Anti-vibration performance | 10g(20…2000Hz) complies with IEC60068-2-6 standard |
Impact resistance | 500g/ms conforms to IEC60068-2-27 standard |
electrical protection | |
Short circuit protection | permanent |
Reverse polarity protection | No damage, but doesn’t work |
Insulation resistance | ≥100MΩ 500VDC |
Dielectric strength | 500VAC |