CYW19Y Absolute Submersible Level Transmitter Pressure Range 0~0.2~2MPa(A) Temperature Range -20~85°C
The CYW19Y absolute pressure submersible level transmitter adopts an absolute pressure measurement process inside, and the internal cavity is completely isolated from the outside. This avoids transmitter damage caused by internal condensation and liquid filling of the cavity caused by the field use environment. Suitable for harsh level measurement sites.
Basic parameters | |
Measuring medium | Water (H2O) or liquids compatible with contact materials |
Measuring range | 0~0.2~2MPa(A)(See range selection table for details) |
Temperature range | -20~85℃ |
Medium temperature | -40~85℃ |
Pressure mode | Absolute(A) |
Frequency of response | The analog signal output ≤ 50Hz, and the digital signal output ≤ 5Hz |
Stable performance | ±0.1% FS/year |
Supply voltage | 4~20mA,RS485 |
Signal output | 4~20mA,RS485 |
Overload capacity | 200% full scale |
Temperature drift | ±0.01%FS/°C (within temperature compensation) ±0.05%FS/°C (outside temperature compensation) |
Explosion-proof type | Intrinsically safe Ex ia II.C T6 Ga (4~20mA output only) |
Ingress protection | IP68 |
Overall weight | Probes ≈ 310g cables ≈ 40g per meter |
Turn-on time | 400ms |
Maximum power | ≤0.02Us(W) Note: Us=supply voltage. |
resolution | Analog output 0.01%FS, digital output 0.05%FS |
Load characteristics | |
Current type | Load ≤{(Us-7.5)÷0.02}Ω (Us=Supply Voltage) |
Environmental conditions | |
Ambient temperature | -40~85℃ |
Overall material | |
Diaphragm | 316L stainless steel (in contact with the medium to be measured) |
Outer shell | 304 stainless steel (in contact with the test medium) |
Seals | Nitrile rubber (contact with the medium to be measured) |
Cable | Polyurethane φ5 shielded cable (in contact with the medium to be measured) |
Mechanical stability | |
Seismic performance | 10g(20… 2000Hz) in accordance with the IEC60068-2-6 standard |
Impact resistance | 500g/ms meets IEC60068-2-27 standard |
Electrical protection | |
Short-circuit protection | perpetual |
Reverse polarity protection | No damage, but no work |
Insulation resistance | ≥100MΩ,500VDC |
Dielectric strength | 500VAC |
Output limits | |
Level output | |
4-20mA | 4~20mA |
RS485 | 0~2000 |
Liquid temperature output | |
4-20mA | 2.5~26mA |
RS485 | 0~1500 |