Tempered Wire Triangle Belt,Triangle A/B/C/D/E/SPA/SPB/SPC Type V Belt
Description:
The belt core of the special belt core triangle belt adopts the whole solid rod-shaped belt core structure of polymer polyester tempered brown wire. Because the polyester tempered brown wire has an overall solid core and untwisted structure, it has good adhesion, flex resistance, high strength, and does not run long. It not only greatly increases the service life of the rubber transmission belt, but also has a balanced service life. It is maintenance-free and replaced regularly. On November 22, 2010, the polyester tempered brown wire skeleton material passed the appraisal of the expert committee: using polyester tempered brown wire as the skeleton material of the transmission belt and traditional polyester soft rope, hard rope, aramid and other fiber rope structure skeleton Compared with the material transmission belt, the service life is increased by 5-10 times, which is the international leading level. The special belt core transmission belt effectively solves the frequent replacement of ordinary transmission belts in the high-load and heavy-horsepower transmission system, and is highly favored by heavy industry enterprises around the world.
Model:
Type | Top width(mm) | Belt Thickness (mm) | Angle (°) | Production scope (lnch) |
O(M) | 10 | 6 | 40° | 20-120 |
A | 13 | 8 | 40° | 25-150 |
B | 17 | 11 | 40° | 28-400 |
C | 22 | 14 | 40° | 48-500 |
D | 32 | 19 | 40° | 99-600 |
E | 38 | 23 | 40° | 120-600 |
3V | 9.5 | 8 | 40° | 25-150 |
5V | 16 | 13.5 | 40° | 28-400 |
8V | 25.5 | 23 | 40° | 48-500 |
SPA | 12.7 | 10 | 40° | 25-150 |
SPB | 16.3 | 13 | 40° | 28-400 |
SPC | 22 | 18 | 40° | 48-500 |
Can be customized according to customer requirements |
Product Image:
About us:
Henan Shuangli Rubber Co., Ltd. is a scientific and technological company integrating research, development and production of triangle belts. It has more than 310 employees.The factory covers an area of 30,000 square meters and a building area of 15,000 square meters,and it’s only one Triangle belt manufacturer in north Henan. It won the honorary titles successively over the years,such as the National Export-oriented of Advanced Units and the Key Protection Enterprises in Henan Province,the Contract-abiding and Trust-worthy Enterprise, Credit Henan AAA Credit Enterprise. In 2017, it passed the certification of ISO9001, ISO14001, OHASA18001 International Quality System, environmental,occupational,healthy and safety certification.The company has 2 national patents currently. In 2015, it was rated as a famous trademark in Henan Province. In 2019, there was no blind spot in the coverage of cities and counties nationwide. At the same time, it was selected as one of the top ten brands of the national triangle belt.
The company’s products are sold by agents all over the country with the advantages of super high quality and complete specifications. The products are sold in Henan, Hebei, Shandong, Shanxi, Hunan, Hubei, Guangdong, Guangxi Jiangxi, Hainan, Ningxia, Heilongjiang, Jilin, Liaoning, Inner Mongolia, Xinjiang, Lhasa and all major provinces, cities and counties, and autonomous regions across the country, they are also exported to Laos, Myanmar, Pakistan, Kyrgyzstan and other countries, and have been trusted and praised by the majority of sellers and users.
Q&A:
Triangle industrial belt Application Essentials:
1. Installation: Before installation, if the center distance of the two axes is adjustable, the center distance should be shortened first, and then the center distance should be adjusted as required after the tape is installed; If the center distance between the two axes is not adjustable, one triangular industrial belt can be first put into the wheel groove of one wheel, and then the other pulley can be rotated to install the triangular belt. Apply the rest of the triangular tape in the same way. It is forbidden to use tools to pry or drag the triangle industrial belt hard during installation to avoid stretching or damaging the triangle belt.
2. Prevent cross-grooves: When installing the belt pulley, the center of the two belts must be aligned, otherwise it will cause the triangle industrial belt to work unilaterally and accelerate the wear, shortening the service life of the triangle industrial belt.