3 - 5 KW Motor Electric Gearbox With Two Speed For Electric Loader Tricycle / Rickshaw
Electric Gearbox Parameters
Ratio | H:8.68 L:20.02 ; H:12.15 L:20.02 |
Power Input Spline | 19*16.5*8 |
Power Output Spline | 25.2*23.2*24 |
Gear Material | 20CrMnTi |
Gear modulus | 3.5--4.5mm |
Housing Material | Steel |
Packaging | Carton, wooden case etc. |
Spline | Involute |
Loading | ≤2T |
Speed | 2 |
Brand | Zhuiye |
Packing (pcs/ctn) | 1pcs/ctn |
G.W. (kgs/ctn) | 15kgs/ctn |
Fit engine | 50--400cc |
Carton size | 370*220*210mm3 |
Application | Tricycle/Rickshaw/ATV |
Lubrication Oil | GL-5 85w/90 gear oil, winter GL-5 80w/90 gear oil |
Electric Gearbox Requirements
1.Ensure all parts are clean before assembly.
2.Add lithium lubricating grease to the bearing and spline.
3.Apply grease to the lip of oil seal.
4.The tightening torque of bolts shall be in accordance with QC/T518.
5.The normal working meshing clearance of bevel gear is 0.05-0.15mm, and that of planetary and side gear is 0.2-0.4mm.
6.After assembly, it shall rotate flexibly without stagnation, abnormal noise, whistling, etc.
7.Air tight test under 0.15-0.25mpa to ensure no air leakage.
8.Add 500ml GL-5 gear oil into the gearbox.
9.Use 75W/90 gear oil in winter of low temperature areas.
Electric Gearbox More Pictures
Electric Gearbox Installation
Electric Gearbox Shipping&Packing
Electric gearbox can be packed by carton, pallet, carton+pallet or any other packing as per your requirements. Electric gearbox usually chooses containerized sea shipping in quantity delivery or air delivery in sample orders.
FAQ
1. Are you manufacturer?
Yes. We are one of leading manufacturers in rear axle design&development.
2. Do you have stock products to sell?
Yes, a few. And we also offer OEM&ODM service. Please send us your drawing.
3. What information needed to get gearbox quotation?
a). Motor watts.
b). Vehicle max loading.
c). Packing&Shipping requirements.
d). Quantity needed.
4. Do you inspect the finished products?
Yes. Each step of production will be carried out inspection by QC department until finishing.