L Shape Aluminum Tile Trim Metal Alloy Corner Edge Ceramic Protection

Application

Profiles are designed to protect the edges of ceramic tiles or similar hard finishes fitted in wall and floor installations, this is an L shaped extruded aluminium profile. The suitability of aluminium must be determined if Chemical or mechanical stresses are anticipated.


Feature

• Ideal if you want to add protection and a clean finish to your tiling projects. It hides the exposed, raw edges of your tiles, masks irregularities and ensures a symmetrical finish. All while protecting your tiles edges against damage
• Suitable for use with wall tiles that are up to 10 mm thick. Available in 11 colours for an easy match with the tiles of your choice. Additional options are available for tiles that are up to 8 mm and 12.5 mm thick
• Easy to install with tile adhesive when tiling
• Made from aluminium for durability, this tile edge trim is both resistant to water and to rust. Ensuring a high level of protection and a great decorative finish to your tiles for years to come
• Perfect for any room of the house, especially frequently used bathrooms and kitchens

Use

1. Select profiles according to tile thickness.

2. Trowel tile adhesive over the area that forms the perimeter of the tiled covering.

3. Press the perforated anchoring leg of the ESA into the tile adhesive and align, mechanical fix if required.

4. Trowel additional adhesive over the perforated anchoring leg to ensure full coverage.

5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile, the profile should not be higher than the tiled surface, but rather up to approximately 1 mm lower.

6. Fill the joint completely with grout.

Specification