Skin whitening home ipl hair removal hair removal machine for ladies
Introduction:
Applying the technique of IPL and Bi-polar Radio Frequency, the equipment acts on the entire skin corium and connective tissue, stimulates the collagens of different depth to realign and grow, then gets treatment effect. Bio-polar RF release energy at the same time, with the selective absorption for the skin to light energy, various pathological tissues of corium and epidermis creates Photothermolysis effect. Since light energy is far below conventional IPL, the pigment tissue and vascular pathological tissue of the corium and epidermis would absorb more energy without injuring the epidermis, and then remove these pathological
tissues better and get the effect.
Specification of the
Wavelength (Spectrum) | 430/530/640-1200nm (standard) 480/560/590/690/750-1200nm (optional) |
Energy Density (Fluence) | 10-60J/cm2 |
RF Energy | Up to 50W |
Spot Size | 15x35mm² interchangeable |
Pulse Repetition Rate | 0.2Hz; 2Hz |
Pulse Duration | 0.5-15ms |
Pulse Delay | 1-50ms |
Pulses | 1-15 pulses |
IPL Peak Power | 1400w |
RF Power | Max. 100W |
Cooling | Continuous Crystal contact cooling (-4℃~2℃ ) + Air cooling + Closed water circulation cooling |
Stand-by Working | Continuously for 18 hours |
Display | 8.4" True Color LCD Touch Screen |
Electrical Requirements | 100-240VAC, 20A max., 50/60Hz |
Advantage :
1. FDA Certification approved, the quality assurance and safety for use .
2. Simple and Professional operation mode , meet different requirements .
3. Hot sales Butterfly design apperance !
4.Germany imported Heraeus xenon lamp ,5 times than other common lamp .
5. Capacitors Imported from Nippon Chemical in Japan .
6. 16 local languages for optional , big advantage for use or resell .
Hair Removal Treatment Procedure :
1. Beautician is required to offer consultation to the patient before treatment.
2. Shave unwanted hair before treatment.
3. Clean skin to remove cosmetics and sunscreens...etc.
4. Apply 1-2 mm cooling gel on the entire treatment area.
5. Operator and patient should wear glasses and goggles properly.
6. Set proper parameters according to patient's Skin Type, Hair Color, Hair Density.
7. Verify that the handpiece tip is cold, sliding handpiece to cool down the treatment area.
8. Click 'Ready' to start treatment and ensure the handpiece perpendicularly and tightly contact the treatment area during treatment.
9. Adjust the parameters during treatment according to patient’s feeling.
10. Hair follicles become swelling , hair could be pulled up gently ,Means good results .
11. 2-3 times for permanent hair removal results .
FAQ
1. What is the Payment Terms?
Re: T/T (Wire Transfer),
2. How do you delivery the machine?
Re: By door to door service, say DHL,UPS,TNT,FEDEX,etc ,Or air cargo
3. What about the delivery?
Re: About 14 working days.
4. Do you offer OEM/ODM service?
Re: Yes .Welcome to contact us for more details.
5. How many treatments are required?
Re: 10 times per course of treatment.