Customizable factory direct sales PE HDPE ADSS single-mode outdoor fibre optic cable
ADSS cable is loose tube stranded.The fibers, 125μm,are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. The tubes and fillers are stranded around a FRP as a non-metallic strength member into a compact and circular cable core,and the cable core is wrapped with a layer of Kevlar. Between the Kevlar yarn and the loose tube, water-blocking material is applied to keep the cable compact and watertight. Final the cable is completed with a polyethylene (PE) or AT outer sheath.
Characteristics:
1. Small cable diameter(adapt for bad climate), light weight, 100m span, low attached load on tower.
2. Non-metal structure, good insulation, anti-thunder.
3. Fine production technology, even force for aramid yarn, with superior stress flexibility.
| | |
| | | | | |
| No. of tubes*fiber pre tube | | | | | |
| | |
Central Strength Member | | |
| | | | | |
| | | | | |
Water Blocking Material | | |
Inner Sheath | | |
Peripheral Strength Member | | |
Outer Sheath | | |
Cable Diameter | | | | | |
Cable Weight | | | | | |
Operation Temperature Range | |
Climate Condition | Max. wind speed: 25m/s, no ice |
Max Span(m) | | | | | |
Crush Resistance Short/Long Term(N/100mm) | |