Tube Condensing Shell and Tube Heat Exchanger
Marine Condenser
Tube Condensing Shell and Tube Heat Exchanger Marine Condenser is suitable for water cooled unit,
water source heat pump, air cooled pump and air cooled heat pump unit.
The product is applying for refrigerants of R22, R134a, R407C and R410A etc.
The referigerating medium is for tap water, underground water, river water and sea water or brine, water
and glycol solution, sulfate solution, etc.
For heat exchange tube, copper pipe, copper nickel alloy tube, aluminum brass tube, stainless steel tube,
etc.
The shell raw material mainly are seamless steel tube, stainless steel pipe.
1, Heat exchange tube: four main tube type.
(1) ∅ within 3/8 "thread copper coil, it is mainly used for" U "type tube evaporator.
(2) ∅ within 1/2 "threaded straight copper tube, straight tube is mainly used for dry-type evaporator.
(3) ∅ 1/2 "corrugated straight stainless steel tube, straight tube is mainly used in food industry of dry
evaporator.
(4) ∅ 5/8 "inside outside screw wing efficient copper tube, it is mainly used for air precooling industry dry
evaporator.
2, shell raw material:
There are two of the major materials:
(1) # 20 seamless steel tube, mainly used for all kinds of load - more than 20 ℃ cold agent.
(2) 304/316 l stainless steel tube, it is mainly used for food and low temperature (below 25 ℃, higher than
40 ℃) of the refrigerant, 316 l can also be used for cooling load of the sulfate for industry.
3, Introduction:
(1) The product is applicable to water chiller units, water source heat pump units etc.
(2) Suitable refrigerants are R22, R134a, R407C, R410A etc.
(3) Apply load cold agent for tap water, underground water, river water and sea water or brine, water and
glycol solution, sulfate solution, etc.
(4) For heat exchange tube, copper pipe, copper nickel alloy tube, aluminum brass tube, stainless steel
tube, etc. Shell using seamless steel pipe, stainless steel tube, etc.
4, Heat exchange tube: two main specifications.
(1) ∅ within 5/8 "efficient copper pipe outside screw wing, ∅ 5/8" stainless steel pipe.
(2) the ∅ 3/4 "inside outside screw wing efficient copper tube, ∅ 3/4" stainless steel pipe
5, Main material, the shell of 20 # seamless steel pipe, stainless steel pipe.
CONDENSER SERIES SINGLE CIRCUIT
CAPACITY: 3RT TO 15RT
Model | Refrig. ton (RT) | Refrig. ton (104kcal/h) | Dimension (mm) | Weight (kg) | Max. water flow | |||||
D | T1 | T | A | C | E | |||||
QXC3S4 | 3 | 1.134 | 114 | 635 | 721 | 75 | 140 | 70 | 23 | 2.5 |
QXC5S5 | 5 | 1.890 | 140 | 635 | 721 | 75 | 165 | 70 | 33 | 4 |
QXC8S6 | 8 | 3.024 | 168 | 762 | 858 | 90 | 185 | 92 | 49 | 6.5 |
QXC10S6 | 10 | 3.780 | 168 | 953 | 1049 | 90 | 185 | 92 | 58 | 7.8 |
QXC12S6 | 12 | 4.536 | 168 | 953 | 1049 | 90 | 185 | 92 | 62 | 9.6 |
QXC15S6 | 15 | 5.670 | 168 | 1270 | 1366 | 100 | 185 | 92 | 75 | 11.6 |
Model | S (Vent) | P (fluoride inlet) Copper pipe diameter (inch) | L(fluoride outlet) Copper pipe diameter (inch) | W (standard port) | W (optional port) |
FPT(inner pipe thread) | FPT(inner pipe thread) | FPT(inner pipe thread) | |||
QXC3S4 | 1/4 | 5/8 | 5/8 | 1 | 3/4 |
QXC5S5 | 1/4 | 5/8 | 5/8 | 1-1/2 | 1 |
QXC8S6 | 1/4 | 7/8 | 5/8 | 1-1/2 | 1 |
QXC10S6 | 1/4 | 7/8 | 5/8 | 1-1/2 | 1 |
QXC12S6 | 1/4 | 1-1/8 | 7/8 | 1-1/2 | 1 |
QXC15S6 | 1/4 | 1-1/8 | 7/8 | 1-1/2 | 1 |
CONDENSER SERIES DOUBLE CIRCUIT
CAPACITY: 220RT TO 426RT
Model | Refrig. ton (RT) | Refrig. ton (104kcal/h) | Dimension (mm) | Weight (kg) | Max. water flow | |||||||
D | T1 | T | A | C | E | H1 | H2 | |||||
QXC220D16A | 220 | 78.55 | 426 | 1430 | 3656 | 120 | 530 | 260 | 310 | 310 | 830 | 165.8 |
QXC240D16A | 240 | 81.65 | 426 | 1430 | 3656 | 120 | 530 | 260 | 310 | 310 | 890 | 181 |
QXC260D20A | 260 | 84.36 | 480 | 1600 | 3800 | 150 | 530 | 280 | 310 | 310 | 953 | 195.5 |
QXC280D20A | 280 | 88.24 | 480 | 1600 | 3800 | 150 | 530 | 280 | 350 | 240 | 1016 | 211 |
QXC320D20A | 320 | 95.21 | 480 | 1600 | 3800 | 180 | 600 | 300 | 350 | 240 | 1098 | 240.6 |
QXC340D22A | 340 | 98.68 | 530 | 1750 | 4000 | 180 | 600 | 300 | 350 | 240 | 1162 | 256 |
QXC380D22A | 380 | 106.53 | 530 | 1750 | 4000 | 200 | 650 | 300 | 400 | 320 | 1253 | 285.5 |
QXC426D22A | 426 | 115.62 | 530 | 1900 | 4000 | 200 | 650 | 300 | 420 | 350 | 1325 | 320 |
Model | S (Vent) | P (fluoride inlet) Copper pipe diameter (inch) | L(fluoride outlet) Copper pipe diameter (inch) | W (standard port) |
FPT(inner pipe thread) | Male flange | |||
QXC220D16A | 3/8 | 2-5/8 | 1-5/8 | DN125 |
QXC240D16A | 3/8 | 2-5/8 | 1-5/8 | DN125 |
QXC260D20A | 3/8 | 2-5/8 | 1-5/8 | DN125 |
QXC280D20A | 3/8 | 3-1/8 | 2-1/8 | DN150 |
QXC320D20A | 3/8 | 3-1/8 | 2-1/8 | DN150 |
QXC340D22A | 3/8 | 4-1/8 | 2-1/8 | DN150 |
QXC380D22A | 3/8 | 4-1/8 | 2-1/8 | DN200 |
QXC426D22A | 3/8 | 4-1/8 | 2-1/8 | DN250 |
U SHAPED TUBE DRY EVAPORATOR (DOUBLE CIRCUIT)
CAPACITY: 35KW TO 95KW
Models | QXU35D6 | QXU47D6 | QXU56D6 | QXU65D8 | QXU80D8 | QXU95D8 | ||
Rated data Refrigerant R22 ti=12°C te=2°C tu=7°C Dts=5°C | Qn | KW | 35 | 47 | 56 | 65 | 80 | 95 |
Kcal/h(×103 ) | 30.2 | 40.4 | 48.2 | 56.7 | 68.8 | 81.7 | ||
Wn | m3 /h | 6 | 8 | 9.6 | 11.4 | 13.8 | 16.4 | |
Wm | m3 /h | 10 | 11.4 | 12 | 14.5 | 19 | 21 | |
Dpn | bar | 0.27 | 0.41 | 0.35 | 0.39 | 0.42 | 0.46 |
Models | QXU35D6 | QXU47D6 | QXU56D6 | QXU65D8 | QXU80D8 | QXU95D8 | |
Dimension(mm) | A | 1275 | 1407 | 1431 | 1431 | 1631 | 1781 |
B | 168 | 168 | 168 | 168 | 219 | 219 | |
C | 107 | 107 | 161 | 161 | 200 | 200 | |
D | 1040 | 1190 | 1030 | 1180 | 1380 | 1530 | |
E | 200 | 200 | 200 | 240 | 240 | 240 | |
Vent | S1 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 |
Outlet | S2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 |
Connection | W(DN) | 50 | 50 | 50 | 50 | 65 | 65 |
D1(mm) | 16 | 16 | 22 | 22 | 22 | 22 | |
D2(mm) | 22 | 22 | 35 | 35 | 35 | 35 | |
P(kg) | 72 | 78 | 88 | 93 | 125 | 136 | |
Qn-rated refrigerating capacity Wn-cooling water flow Wm-maximum cooling water flow Dpn-pressure drop of recirculating cooling water Dts-overheat temperature |
HORIZONTAL ACCUMULATOR
CAPACITY 10L TO 80L
Models | L | Dimension (mm) | Kg | ||||
D | A1 | A | B1 | B | |||
QXR10W | 10 | 219 | 200 | 150 | 400 | 200 | 20 |
QXR15W | 15 | 219 | 250 | 200 | 600 | 400 | 27 |
QXR20W | 20 | 273 | 250 | 200 | 650 | 400 | 39 |
QXR30W | 30 | 325 | 300 | 250 | 700 | 400 | 54 |
QXR40W | 40 | 325 | 300 | 300 | 900 | 600 | 67 |
QXR60W | 60 | 355 | 350 | 300 | 900 | 600 | 81 |
QXR80W | 80 | 355 | 350 | 300 | 1200 | 900 | 106 |
Models | S (pipe thread) | P1 | P2 |
FPT | Pipe diameter (inch) | Pipe diameter (inch) | |
QXR10W | 3/8 | 7/8 | 7/8 |
QXR15W | 3/8 | 1-1/8 | 1-1/8 |
QXR20W | 3/8 | 1-3/8 | 1-3/8 |
QXR30W | 3/8 | 1-3/8 | 1-3/8 |
QXR40W | 3/8 | 1-3/8 | 1-3/8 |
QXR60W | 3/8 | 1-5/8 | 1-5/8 |
QXR80W | 3/8 | 1-5/8 | 1-5/8 |
COOPERATED CLENTS