Tungsten Carbide Rod is mainly made of WC and Co through powder metallurgic processing. They have good shock resistance and bending resistance. With more than 20 years of experience, we can provide you with the carbide rods you want.

-- HIP sintering

-- 89-93HRA with high wear resistance

-- Polished surface

-- 100% Virgin pure raw materials

-- Flexible payment terms (L/C, T/T, western union, etc)

-- Certificate of origin available

-- 7 days 24 hours after-sale service

Diameter range	0.33mm--60mm
Length Range	3mm--1000mm;
Diameter Grade	h4(H4), h5(H5), h6(H6), h7(H7), h8(H8), h9(H9).
Surface Roughness	Polished Ra 0.04 or unpolished
Remarks	OEM acceptable

Grade/ Properties / Application
Grade	Equal to ISO Category Number	Performance			Performance&application recommended
		Density	Bend Strength	Hardness
		G/Cm 3	N/mm 2	HRA
YG6X	K10	14.8-15.1	≥1560	≥91.0	Qualified for machining of chilled cast iron, alloy cast iron, refractory steel and alloy steel. Also Qualified for the machining of common cast iron.
YG6A	K10	14.7-15.1	≥1580	≥91.0
YG6	K20	14.7-15.1	≥1670	≥89.5	Qualified for finish machining and semi-finish machining for cast iron, non-ferrous metal, alloy, and unalloyed materials. Also qualified for wire drawing for the steel and non-ferrous metal, electric drill for geology use and steel drill etc.
YG8	K30	14.6-14.9	≥1840	≥89	Qualified for rough machining of cast iron, non-ferrous metal, nonmetal materials, drawing of steel, non-ferrous metal, and pipes, various drills for geology use, tools for machine manufacture, and wearing parts.
YG10X		14.5	2400	91.5	Fine grain alloy, good wear resistance, Used for processing hard
					wood, veneer board, PCB, PVC, and metals.
YL10.2		14.5	2400	91.8	Forming or stamping dies for metal powders and nonmental powders.
YG13X		14.3	2600	89.5	For oil cone drill bits, for medium soft and medium-hard rocks.