Metal Cutting Tungsten Carbide Sandblast Nozzles , Rotating Water Jet Nozzle

Introduction

Name: Sand mixing pipes are also called sand mixing pipes, sand pipes, sand knife pipes, sand knife pipes, sand nozzles, sand nozzles, sand nozzles or abrasive nozzles. English Nozzles or Mixing Tubes.
Specification: There are many specifications for sand mixing pipe. It is mainly reflected by three values of outer diameter, inner diameter and length, namely D * D * L. for example
sand blasting nozzle ,also name tungsten carbide water cutting,tungsten carbide sand tube.it is mainly using to cutting metal,ceramic,stone,glass or other materials.

spcifications:

Use superfine nanometer tungsten carbide particles, the wear-resisting performance to the next level, superior
wear resistance makes it far beyond the ordinary tungsten carbide,The service life of the nozzle.Cobalt
content of less than 0.6%, density of 15.45 g/cm3 ~ 15.6 g/cm3, bending 2000 mpa to 2400MPa.Super oxygen resistance, small thermal expansion coefficient, unique high hardness and density, far beyond the other similar products, the use of hard Alloy tube abrasion resistance stronger.
Sand tube due to high-speed abrasive particle erosion, its selection is very important.Sand tube material, in general, must have high hardness, high resistance Grinding, both be short of one cannot.Generally for tungsten carbide composite materials processing.Usually, cemented carbide, WC as the main
resistance,Grinding phase exists in the form of particles, CO, just as the binder.
Use: widely used in various types machine, WHP type, FLOW type, type JET, KMT, OMAX type, type WS.

Application

1. Metal cutting

2. Ceramic cutting

3. Stone cutting

4. Glass cutting