TNMG1604 Tungsten Carbide Cutter Turning Inserts PVD Coated Carbide Grades

The character of carbide inserts:

1. High hardness

2. High wear resistance

3. Good strength and good toughness.

4. Good heat resistance, and good corrosion resistance

5. Indexable and replaceable

6. Safe, quick and easy to be replaced on the machine.

Models introduction:

Grades recommendation:

Advantages of our carbide inserts:

1. Good performance every time

Reliable carbide insert grade means you get a very reliable and secure performance at every time.

2. Higher production

Long tool life means you get higher machine utilization and higher production.

3. Increasing profits

Less tool breakage means you can control costs and reduce the cost per component to increase profits.

How to adjusting the machining parameters?

-The material of the workpiece contains high hardness chemical elements (tool steel, die steel)

1. Carbide insert worn: If it was caused by a very slow cutting speed.

Suggestion: Reduce the cutting speed or feed rate or use more wear resistant grade

2. Carbide insert cracked: If it was excessive feed rates when interrupted cutting

Suggestion : Reduce the feed rate, Use tougher grade

Quality control:

Technical support:

Our company can providing the following technical services for customers:

1. Suggesting the grade according to the application and workpiece material

2. Suggesting the machining parameters to get higher machine utilization and higher production

3. Suggsting more suitable models to replace the brands of Japan, Korea and so on.

After-sale service:

1. Can be refund if there is a quality problem

2. Technical support will be offered once you need

3. Accepting customer visiting

Tool holder can be offered upon request.