PVD Coating DCMT0702 Tungsten Carbide Inserts Metal Cutting For Stainless Steel Machining

What is tungsten carbide inserts?

Cemented carbide is a hard material used extensively as cutting tool material, as well as other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal.

Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites.

Excellent chip control for Stainless steel machining . Provides perfect turning surface of the workpiece:

Models introduction for Stainless Steel machining:

Different chipbreakers:

Grades recommendation:

Contrast Advantage/Benefits of choosing our carbide inserts:

1. High precision.

Each of our inserts are precision ground and fitting for use on a multitude range of materials and machine tools.

2. PVD coating.

The coating helps to decrease the temperature associated with the cutting process and increase the life of the tool.

3. Long tool life, higher production efficiency.
Long tool life means you need less time changing the inserts while machining. A reliable and safe performance every time.

4. Less tool breakage, cost down of each component

Saving costs and reducing the cost of each component to increase the profits .The high wear resistance makes the long tool life of the carbide inserts, which means you could saving more budget on purchasing the inserts.

Customer’s case: when a insert is failed on performance:

1. Flank Wear
-Workpiece material contains high hardness chemical elements (tool steel, die steel)
Increase cutting speed if abnormal flank wear is caused by a very slow cutting speed.
Solution: Reduce cutting speed or feed rate or use more wear resistant grade

2. Crater Wear

-Workpiece material contains high hardness chemical elements
Solution: Reduce cutting speed or feed rate or use more wear resistant grade

3. Cracking

-Excessive feed rates when interrupted cutting
Solution: Reduce feed rate, Use tougher grade

Quality control:

Technical support and after-sale service:

Our company can providing the following technical service for customers:

1: We are committed to product quality control and quality assurance.

2: We are professional production factory.

3: Quality control and delivery time is strictly controlled.

4. Flexible payment terms, T/T, L/C, West Union and so on.

Tool holder:

S08K-SDQCR/L07

S10K-SDQCR/L07

S12M-SDQCR/L07

S16Q-SDQCR/L07

S20Q-SDQCR/L11

S25R-SDQCR/L11

S32S-SDQCR/L11