Tungsten carbide die used for cold heading and cold punching standard parts, bearings, screws, and nuts. With high impact resistance, toughness, and wear resistance. Wire drawing dies are commonly used to reduce the diameter of various ferrous and non-ferrous rods and wires. Applications include various grades of low, medium, and high carbon steels, steel alloys, stainless steel, welding wire as well as various non-ferrous rods and wires. The high wear resistance of our tungsten carbide nozzles will ensure that even the most abrasive filament can be printed with confidence.

Features:

Ultra wear-resistant: The high hardness of tungsten carbide will provide a carefree extrusion experience. Its unparalleled wear resistance will ensure that both the nozzle diameter and flat will keep the same dimension, and so will your printed parts.

Low pushing force: The high thermal conductivity of both the nozzle tip and body will pump all the required heat to maintain an even temperature while extruding. Viscosity highly depends on the plastic temperature for a constant shear rate. The flow pressure will be constantly resulting in excellent results and stability. The ease of pushing the filament will give an extra margin for your extruder safety.

Faster speed: Due to the high thermal performance of the nozzle in general, the printing speed can be pushed even further without sacrificing the quality. The special shape inside the nozzle — made possible by Dyze Design’s machining and manufacturing techniques — improves the flow where the diameter tapers, thus allowing a faster flow rate.

Low friction: The whole nozzle is electroless nickel plated for enhanced slippery properties. Plastic will slide on the nozzle instead of sticking to it. This results in cleaner parts and fewer issues from drag.

Advantage

• The high wear resistance of our tungsten carbide nozzles will ensure that even the most abrasive filament can be printed with confidence
• The high thermal conductivity of tungsten carbide means you can print faster.
• Tungsten carbide will not soften at high temperatures like hardened steel, resulting in a longer-lasting nozzle. Print up to 500c with high abrasion resistance!

Grades and Properties

Performance Chart

Product Packaging

Company Introduction