High Performance Air Compressor Heater Compressor Crankcase Oil Heater UL

Tutco builds the best crankcase heater for customer, there are 3 styles can be selected, SS style, Aluminum style and silicone style. UL products with very good performance products truely protect your compressor.

Why TUTCO:

• Heater is UL listed for Outdoor Applications
• All of the limit controls in all TUTCO duct heaters are automatic resets or are manually resettable.
• There are no devices that have to be replaced when tripped.
• In a horizontal airflow application, the airflow direction is not specific; it can go either direction without any modification.
• With our wire rack element suspension system, the heater coil is less susceptible to airflow shading and allows a very small pressure drop across the coils.
• All TUTCO duct heaters carry a zero clearance rating for installations into ducts.

Descriptions:

• Corrosion resistant exterior
• High temperature silicone rubber element and VW-1 insulated lead wires rated for 150°C
• Custom leads and terminations available
• Voltages through 600vac
• Wattage for each model matches compressor requirements
• Completely moisture-proof
• Quick and easy installation
• Nominal power consumption due to highly efficient heat transmission and low wattage
• U.L. recognized

Features and Benefits:

Better Belly Band:
• Sealed to operate in a variety of environments
• Stainless steel construction
• Moisture resistant
• Oil resistant PVC lead wire
• Does not burn out in open air
• U.L. rated
Double Loop Belly Band:
• Superior heat sink
• Produces more wattage than a single heater
• Depending on application, wattages up to 9W per linear inch
• Single termination exit point
• Two versions: Standard Width: 1-1/4"
Narrow Width: 7/8"
• Conduit boxes and lead wire protection available
• Does not burn out in open air

Application:

• HVAC, food warming equipment, specialty
• refrigeration, medical and laboratory equipment.
• This product can be customized to most cylindrical
• and oval shaped diameters.