Single head heating pipe wire cartridge heater compressed air heating
Technical Detail:
1 Tube diameter: Φ3mm-Φ30mm
2 Tube Material:SS304;SS316,SS321,NICOLOY800 etc
3 Insulation Material:High-purity Mgo
4 Reisistance wire element:Ni-Cr or FeCr
5 Lead Connection Option: Crimped or Swaged leads
6 Lead and type of connection leads, 10" Fiberglass Standard(Wire options,silicone high temperature frberglass).
Heat intensity | Not exceeding 30Wcm2 (advisable) |
Power | Depends on the dimension |
Escape of current (when cold) | <=0.1mA a 242 v. |
Insulation (when cold) | 5 Min Ohmios 500 Watts minimum |
Dielectric strength | 1500v. 1/seg |
Working temperature | 750ºG max. |
Tolerance of length | +/-1.5% |
Tolerance of diameter | -0.01 a -0.06 m/m |
Tolerance of cut of connexion | +/-15 mlm |
Power tolerance (w) | 5 % - 10 % |
Cold areas | Depends on length and diameter 5-25mm |
Feature:
Commom cartridge can be devideded :
1) High power density (heat area sufuce power 10~25w/cm2)
Working temperature≤450 degrees.
2) Middle,low power density (heat area sufuce power 5~11/cm2)
working temperature≤ 300 degrees
Votage:12~250V (or as requirment)
High Density Construction
High-quality stainless steel construction provides long-lasting protection even in the most rugged industrial environments
Protected with a stainless steel sheath, their watt density can reach 50 W/cm2 and their operating temperature can go up to 800°C.