silicone rubber heating mat and heater compressor crankcase heater High Performance
Tutco builds the best crankcase heater for customer, there are 3 styles can be selected, SS style, Aluminum style and silicone style. UL products with very good performance products truely protect your compressor.
Description
- New, in original packaging
- 120 Volts. 500 Watts of heating power
- Rated for 20-40 gallon tanks
- Universal application
- Mounts in any position
- Pad dimensions are 5-1/2" x 8-1/2"
- Made from very flexible and pliable silicone
- High temp. 3M adhesive on the reverse side
- Keeps engine oil warm even in the coldest temperatures
- Use as a hydraulic tank, fuel tank, oil pan, or transmission pan heater
- Plugs into any 120 volt receptacle
- Oil, acid, salt, fuel, water and weather resistant
- Easy to install, requires little mechanical abilit
Techical Parameters:
- Maximum temperature resistance of insulator:300℃
- Maximum operation temperature: 250℃
- Insulation Resistance:≥500 MΩ/DC 1000V
- Breakdown Voltage:≥ AC1500v/5S
- Capacity Tolerance:±5%
- Temperature range: -60℃—250℃ continuous heating; Heating element: Available with either etched foil or wire-wound elements:
- Dimension:Maximum 1.2m×Xm Minimun 15mm×15mm; Thickness 1.5mm(Thinnest 0.8mm, Thickest 4.5mm)Lead wire Length:Standard 130mm.
Application:
- HVAC, food warming equipment, specialty
- refrigeration, medical and laboratory equipment.
- This product can be customized to most cylindrical
- and oval shaped diameters.
Why TUTCO
- Heater is UL listed for Outdoor Applications
- All of the limit controls in all TUTCO duct heaters are automatic resets or are manually resettable.
- There are no devices that have to be replaced when tripped.
- In a horizontal airflow application, the airflow direction is not specific; it can go either direction without any modification.
- With our wire rack element suspension system, the heater coil is less susceptible to airflow shading and allows a very small pressure drop across the coils.
- All TUTCO duct heaters carry a zero clearance rating for installations into ducts.

