EN 1869 Standard Fire Blanket Fire Flame Retardant Blanket
This type fire blanket is made according to the standard of EN1869:1997. It has wide usage of our daily life,and it is a specially treated glass fiber fabric which is very soft, smooth and does not irritate skin,which use fiberglass thread to sew the fold and fire resistance ribbon. So the crafts ensure the whole fire resistance. Use it to Cover the fire source and block the air to achieve the purpose of extinguishing the fire.
Specification of Fire Blanket:
Item |
Fire blanket |
Coat |
Silicone coating |
Size |
1.0*1.0m,1.2*1.2m,1.2*1.8m,1.8*1.8m |
Warp Force |
>/=1600n/5cm |
Weft Force |
>/=740n/5cm |
Standard Width |
(1000-1800)+15/-10mm |
Standard |
EN 1869:1997 |
Using Instruction:
1.Place the product on the wall at a easily noticed and reached location or inside a drawer.
2. When fire accident occurs, quickly take out the product with both hands pulling the 2 black tapes.
3. Open up the product and hold it in your hand as if you are holding a shield.
4. Use the product to cover up the fire lightly and at the same time, cut off electricity or gas.
5. While the product is covering up the fire, use other measures to distinguish the fire until it is completely off.
6. After the fire has been completely distinguished, take off the product when it has been cooled down and treat it as an inflammable trash.
7. In case the clothes of a person are on fire, please wrap the person with the product to distinguish the fire and call emergency rescue line immediately.