Custom 0.4mm 0.5mm PI taped copper litz wire for transformer/motor
Taped litz wire has excellent insulation performance, wear resistance and high temperature resistance, and has been widely used in the electronics industry.
Taped litz wire is a kind of wire made of enamelled round copper wire after twisting, and then wrapped with a layer of special material-polyimide film. It is mainly used for electrical connection or signal transmission between the internal or external contacts of electronic components.
Test report for litz wire served with tape Spec: 2UEW-F-PI 0.4mm*60 | ||
Characteristics | Technical requests | Test Results |
Outer diameter of single wire(mm) | 0.422-0.439 | 0.428-0.438 |
Conductor diameter(mm) | 0.40±0.005 | 0.397-0.399 |
Overall dimension(mm) | Min.4.74 | 4.21-4.51 |
No. Of strands | 60 | 60 |
Pitch(mm) | 47±3 | √ |
Maximum Resistance(Ω/m 20℃) | 0.002415 | 0.00227 |
Dielectric strength(V) | Min.6000 | 13500 |
Tape(overlap %) | Min.50 | 53 |
Name | Custom 0.4mm 0.5mm PI taped copper litz wire for transformer/motor |
Key word | Mylar litz wire |
Insulationh | Enamel, polyster cover |
Thermal rating | 155degree |
Diameter of the enameled copper wire | 0.05mm |
Number of strands | 30 |
Type | Custom 0.4mm 0.5mm PI taped copper litz wire for transformer/motor |