0.13 - 1.0mm Colorful Triple Insulated Winding Wire Enameled Magnet Wire
The feature of triple inslated wire is in its insulation layers. IEC standards require specified insulation between primary and secondary coils of transformers. And the standards do not accept general enameled wire as insulation therefore insulation tape or barrier tape are required in transformers using enameled wire. Triple insulated wire however, has triple insulation layers which comply IEC requirement and therefore can be used without barrier tape or interlayer tape between primary and secondary coils.
The insulation of the wire, which is made up of three layers, completely isolates the primary from secondary of the transformer.
Unlike conventional enameled wires, the TIW series is classified as a wire with three-layered, reinforced insulation (Whereas, SWW-2 is a wire with supplementary insulation) as generally provided for in various safety standards. Therefore, it eliminates barriers, interlayer tapes, and insulating tubes in a transformer.
In addition to the reduction in size and economy in material cost of the tramsformer made, TIW has an advantage of improving its performance by reducing the distance between the coils
APPLICATION
Induction coating hobs
RF transformers
RF transducers
E-Motors.
<
Conductor m/m | End product m/m | Maximum Conductor Resistance at 20 ℃ | Minimum Elongation % | ||
Diameter m/m | Tolerance m/m | Target outside diameter | Tolerance m/m | ||
0.15 | ±0.008 | 0.35 | ±0.02 | 1111 | 15 |
0.16 | ±0.008 | 0.36 | ±0.02 | 908.8 | 15 |
0.17 | ±0.008 | 0.37 | ±0.02 | 853.5 | 15 |
0.18 | ±0.008 | 0.38 | ±0.02 | 757 | 15 |
0.19 | ±0.008 | 0.39 | ±0.02 | 676.2 | 15 |
0.2 | ±0.008 | 0.4 | ±0.02 | 607.6 | 15 |
0.21 | ±0.008 | 0.41 | ±0.02 | 549 | 15 |
0.22 | ±0.008 | 0.42 | ±0.02 | 498.4 | 15 |
0.23 | ±0.008 | 0.43 | ±0.02 | 454.5 | 15 |
0.24 | ±0.008 | 0.44 | ±0.02 | 416.2 | 15 |
0.25 | ±0.008 | 0.45 | ±0.02 | 382.5 | 15 |
0.26 | ±0.010 | 0.46 | ±0.02 | 358.4 | 15 |
0.27 | ±0.010 | 0.47 | ±0.02 | 331.4 | 15 |
0.28 | ±0.010 | 0.48 | ±0.02 | 307.3 | 15 |
0.29 | ±0.010 | 0.49 | ±0.02 | 285.7 | 20 |
0.3 | ±0.010 | 0.5 | ±0.02 | 262.9 | 20 |
0.32 | ±0.010 | 0.52 | ±0.02 | 230 | 20 |
0.35 | ±0.010 | 0.55 | ±0.02 | 191.2 | 20 |
0.37 | ±0.010 | 0.57 | ±0.02 | 170.6 | 20 |
0.4 | ±0.010 | 0.6 | ±0.02 | 145.3 | 20 |
0.45 | ±0.010 | 0.65 | ±0.02 | 114.2 | 20 |
0.5 | ±0.010 | 0.7 | ±0.02 | 91.4 | 20 |
0.55 | ±0.020 | 0.75 | ±0.02 | 78.2 | 20 |
0.6 | ±0.020 | 0.8 | ±0.02 | 65.3 | 20 |
0.65 | ±0.020 | 0.85 | ±0.02 | 88.3 | 20 |
0.7 | ±0.020 | 0.9 | ±0.02 | 47.2 | 20 |
0.75 | ±0.020 | 0.95 | ±0.02 | 41.2 | 20 |
0.8 | ±0.020 | 1 | ±0.02 | 36.1 | 25 |
0.85 | ±0.020 | 1.05 | ±0.02 | 31.9 | 25 |
0.9 | ±0.020 | 1.1 | ±0.02 | 28.4 | 25 |
0.95 | ±0.020 | 1.15 | ±0.02 | 25.4 | 25 |
1 | ±0.030 | 1.2 | ±0.02 | 23.3 | 25 |