DIFFERENT COLORS ENAMELD COPPER WIRE 0.15-1.0MM TRIPLE INSULATED WIRE

We may be the only one supplier who can provide class F/155 triple insulated wire which size starts from 0.15mm. At this level, our quality is better than Furukawa that was tested by some transofmer manuafactures whom used triple insulated wire from Furukawa.Unlike enameled wires, 3 layers of insulation of patented design are extruded over the copper conductor. IEC60950 requires some Reinforced Insulation between the primary and secondary coils. Thus enamelled wire transformers can never omit the insulation tape or barrier tape: enamel coatings give poor electric insulation. In contrast, TIW can form primary and secondary coils without a need of barrier tape or interlayer tape in-between. Each TIW wire is equipped with a three-fold insulation around the conductor, which has been authorized as Reinforced Insulation. As a result, the creepage distance can never be limited and no insulation barrier is needed, when specifying distances between termination pins and coils.

APPLICATION:

SMPS for Printer, Monitor, Inverter, Battery charger of digital camera, Portable phone, AC adapter for Personal computer, DVD...etc.

FEATURES AND BENEFITS

• The insulations of TILW-B are consisted of three extruded layers (reinforced type), which can completely isolates the primary from secondary of the transformer without interlayer tape.

• TILW-B will simplify the structure and reduce the size and material cost of the transformer.

• TILW-B can be soldered without stripping the insulation film.

• Rating voltage: 1,000Vrms.

• Available wire size from 0.2mm to 1.0mm.

• Thermal index: B class (130℃).

• Any two layers of insulation can resist to a withstand voltage as large as 3000V AC for 1 minute. The dielectric breakdown voltage of TILW-B is higher than 19KV(twisted pair).

SPECIFICATIONS: