6. Large screen display, double line 14 bit LCD liquid crystal display (with backlight),characters of the man-machine interface.
7. With RS485 serial communication, the standard MODBUS RTU protocol, can communicate with Ethernet device, PC, PLC and DCS.
8.Parshall flume flow meter can provide up to 6 relays, can set the upper limit and lower limit alarm and control(instantaneous flow rate and water level), Can be set high, low and fault alarms.
Parshall flume flow meter TECHNICAL PARAMETERS
Weir & Flume Match: Chinese Standard: Parshall Flume,Triangular Weir,Retangular Weir,Non-throat Flume
ISO Standard: Parshall Flume
USBR Standard: Long-throat Flume(Rectangular Flume,Trapezoid Flume)
Probe: 4m(otherwise other range and anti-corrosion requirements, indicate when you order it)
Accuracy: 0.2% Full span(In air)
Display Resolution: 1mm
Mode of Indication: 14 Digit LCD in 2 rows
Output Current: DC4-20mA/RS485(Modbus standard protocol)/Hart Serial Communication
Output load:0-500Ω
Output Resolution: 0.03% Full span
Relays: 2,4,5,6(5A 250VAC/30VDC)
Baud rate:19200/9600/4800
Parameter set up: 3 induction buttons
Temperature Range: -40 ºC ~75 ºC (LCD:-20 ºC ~+70ºC)
Temperature compensation: The whole range is automatic
Pressure Range: ±0.1MP (press definitely)
Power Supply: DC24V(±5%) 0.2A
AC220V(±20%) 0.1A
Cable: Ø6-12mm
Single Wire Diameter: Ø0.5-1.78mm
Cable Fix: PG13.5/M20
Measure Cycle: 1.5second
Crust Material: ABS
Sensor Material: ABS/PVC/PTFE
Protect Grade: IP67
Parshall flume flow meter Installation drawing:
With years of export experience along with excellent quality, advanced services and competitive prices, Kingnod has won numerous customers' trust and support.With years of export experience along with excellent quality, advanced services and competitive prices, Kingnod has won numerous customers' trust and support.
Parshall flume flowmeter standard meter: 3-7 days
Special meter: pls contact us
Express, by air, by sea canbe optional.