Thermal Paste CPU Soft Silicone Gel Liquid Gap Filler For Heat Cooler

Product feature
■ Thermal conductivity: 1.5,2.0,3.0,3.5W/m.K
■ Room temperature cure
■ Highly compliant
■ Low pressure vs. deflection
■ High volume applications

Typical applications

■Applications that require one-part dispensing
■Any design where vertical gap stability and no pump out are required
■Devices demanding low assembly pressure
■Automotive electronics (ADAS, HEV, NEV, batteries, ECU)
■Telecommunications
■Computer and peripherals
■Between heat-generating semiconductors and a heat sink

■ Networking and Telecommunications
■ IT: Notebooks, Tablets, Memory Modules
■ Industrial: LEDs, Power Supplies
■ Automotive: Control Modules, Turbo Actuators
■ Consumer Electronics: Gaming Systems, LCD TVs, Displays

Two-part dispensable gap filler

TF Series Thermal Conductive Gap Filler products are two-component pre-formed thermally conductive silicone products, which mainly meet the requirements of low stress and high compressive modulus when the product is in use, and can realize automatic production; it has good contact with electronic products when assembling. A low contact thermal resistance and good electrical insulation characteristics. The cured thermally gap filler is equivalent to a thermally conductive pad, with good high temperature resistance and aging resistance, and can work for a long time at -40~200℃.

Purchase information
Packing specification: 50mL(25mL each part) / 400ml(200mL each part)/20kg (10kg each part)

Directions for use
• Working hours @ 25C : 1 hour
• Dry to touch @ 25C : 1 hour
• Full cure @ 25C : 12-16 hours
• Full cure @ 100C : 1 hour

Storage & Shelf life
Store in a cool, dry, well ventilated place. Shelf life of the product is 6 months after date of shipment.