Oil Rust Degreasing Industrial Ultrasonic Cleaner Tank For Engine Block Hardware Parts

Customize a suitable machine for yourself

We have many customers with there different need of the machine, so cutomize the functions are very important.

The functions we provide normally.

1. Filter System: The most popular function for the heavy oil cleaning, like the engine/ carburetor/ heating exchanger.

With a smaller filter tank and filter bag to keep the water or detergent in ultrasonic tank clean.

Bubbling System: Usually use with the filter, some heavy sediment like scrap iron, bits of woods can not flow into the filter tank, so we need blow them onto the top of water and filtrate them.

Pump and Filtration Systems

A pump and filter system can be installed to maintain the cleanliness level of the cleaning fluid, thus saving costs in water usage, detergent dosing and heating.

Benefits of ultrasonics for filters:
Cleans delicate parts without damage
Cleans cracks and crevices that would be difficult to reach with the hand
Does not require line-of-sight for effective cleaning
Doesn’t use harsh chemical solvents that are dangerous for workers and the environment
Safe for aluminum, magnesium and zinc
Biodegradable cleaner
Clean multiple pieces at once without having to brush by hand – saves time and money

Transducer Efficiency

The efficiency of the transducer used in your ultrasonic cleaning tank will affect both the cleaning time and efficiency achieved during the cycle. A poor quality transducer will use more power and take longer to clean items than an advanced transducer.

Ultrawave have invested a significant amount of time and money into the design and development of our transducers, providing you with superior cavitation performance.

Ultrasonic Power

The level of ultrasonic power is commonly referred to in ultrasonic Watts per litre capacity. For example a 30 litre tank with 600W of ultrasonics will give 20W/litre.

In general, the level of ultrasonic power should not be less than 8W/litre although this can sometimes be reduced for very large tanks.

Ultrawave measure the power of our ultrasonic systems in RMS. This gives the total power of the transducers. Some manufacturers measure the ultrasonic power in “peak to peak” which doubles this value so it is important to compare the same measurements

AG ultrasonic cleaning machine effectively and thoroughly clean all types of Filter Cleaning