Providing Branson 902J Converter for Using with 905 1000w Power Supplies and 900 Series Model Pressess

Description:

Replacement converter for Branson model 902J (101-135-047), for use with 910IW or IW+ intergrated benchtop welders or 905 or 910 D/M (500 and 1000 watt) power supplies using actuator or assembly stand units. These converters are made in a highly controlled and repeatable manner to duplicate the performance of the OEM models.

All of the components used in construction of these Branson 902J replacement converters are all new, not recovered from scrapped units. The parts are made from certified materials in tightly controlled manufacturing processes, assembled and tested in a climate-controlled environment using carefully calibrated equipment, then properly aged and re-tested to ensure performance that duplicates the OEM part. The entire process is conducted in a ISO registered facility. Best of all, since the manufacturing process is so carefully controlled, durability is assured.

Specifications:

What should I do if the transducer is not working well?

Common problems in trials are wafer cracking, weakness, easy overload, electrode pad ignition, electrode chip cracking, severe heat generation, strange noise, leakage wave, wafer misalignment, etc.; the reasons can be classified into three categories:
1. There is a problem with the customer's drive power or mold and assembly.
In this case, we recommend that customers actively find the cause or communicate with our technical staff to improve as soon as possible. Even if you don't use our company's products, it is definitely beneficial and harmless to improve your own problems.
2. There is a problem with the transducer and the horn.
This situation is also certain to happen, but the possibility of discovery is small.
3. Both products have no problems, but they do not match.
This is the most common situation, that is, the customer's drive power is good, the transducer is good, the assembly is normal, but the parts are not Match. The main parameters causing the mismatch are the frequency and capacitance of the transducer.

Providing Branson 902J Converter for Using with 905 1000w Power Supplies and 900 Series Model Pressess