Excellent performance of Mitech MVD series of industrial borescope equipment

Application

Turbine overhaul: Turbine cleaning, paddle and nozzle / nozzle block check, find off parts, corrosion inside and outside the pipe;

Aerospace: Aircraft parts, large diesel engines, various engines and pipelines for routine maintenance and inspection;

Petrochemical Industry: Used for detection of oil refineries in the storage tank, heat exchangers, ball tankers, chemical industry pipeline facilities, special inspection and pressure vessel production units of containers, cylinders, pipelines;

Military: Used to check the mechanical gear parts wear, loose, oil spills, barrel internal situation;

Motor traffic: Car engine cleaning and maintenance;

Machine casting: Automotive parts casting, hydraulic casting, pump body casting, mechanical parts casting, pipe fittings casting;Used to check the situation of sand casting, burr and staggered hole quality control;

Power industry: Power generation, equipment defect detection and condition monitoring

Outline Structure

1 Screen 2 Joystick 3 Handle

4 Battery 5 Detecting Line 6 USB,Charging port(Side)

System Operation

When the instrument is on, press menu button to enter menu mode.Push the joystick around, and you can choose between the Image menu and the System menu

Figure 5-1 System&Image menu

Note: When the cursor is in a submenu, you can’t switch between the two menus.It is only available when the cursor is at the top of the interface.

After entering the corresponding main menu, push up and down the joystick to select the submenu. When the cursor moves to the corresponding submenu, press the joystick (or move the joystick to the right), select the desired parameter for the submenu, select the desired parameter, and press the joystick to complete the parameter setting.

Instrument Configuration