20Khz Ultrasonic cutter for Robotic plastic deflashing/cutting machine

Specification:

Description:

• Environment-friendly (No noise, no smoke, no air contamination)
• Smooth cutting of difficult-to-cut materials
• Small hand-held size(can be attached to automotive machinery arms)
• No special installation equipmen

Ultrasonic Cutting Machine is a class of device using ultrasonic energy for cutting. Instead of using traditional blade cutting,
ultrasonic cutting has its advantages of smooth, reliable cutting, accurate trimming, no deformation, no raising, fuzzing, spinning,
wrinkling etc. It can avoid the rough cutting-edge, coked edge, fuzzballs and other shortcomings of laser cutting machine.
Ultrasonic cutting machine is used for cutting rubber, synthetic fabric, cloth, plastic, sheet metal, food etc.
The cutting of food products using ultrasound is performed when an ultrasonic blade comes into contact with the product to be cut,
the high vibration of 40,000 pulses per second, makes this product very easily be cut even if it is of delicate or sticky texture composition.
The much higher vibration does not allow any product to stick to the blade. The cut is clean and without pressure on the product.

TYPICAL MATERIALS PROCESSED

• Aramid Prepreg
• Boron Prepreg
• Carbon Phenolic Prepreg
• Fiberglass Prepreg
• Graphite Prepreg
• Hybrid Prepreg
• Thermoplastic Prepreg
• Unidirectional Tape
• Aluminum Core Cured/Uncured Rubber
• Foam Core Sealant
• Nomex Core
• Phenolic Core
• Woven Fabric
• Braided Materials

Competitive Advantage:

★ The use of high power ultrasonic transducer vibrating element, ensure the long time stable working

★ The cutting speed is improved greatly, the efficiency 10 times higher than the traditional cutting knife.

★ Cutting all kinds of ordinary tool to cut products, solve production problems

★ Can be installed high hardness blade, cutting blade can be replaced, greatly reducing the use cost

★ Cutting tool complete varieties, can also be customized according to customer process shaped cutting

tool

★ Installation, easy to use, almost does not change the original cutting process

★ Can be used in the production of circular ultrasonic tool cutting equipment, rolling cutting, suitable

for cutting special

★ Can use air-cooled, water-cooled design, adapt to various working conditions and environment

Problem and solution:

20Khz Ultrasonic cutter for Robotic plastic deflashing/cutting machine