Ultrasound Probe GE 9L-D Wide Band Linear Vascular Diagnostic Imaging Medical Equipment

GE 9L-D Wide Band Linear Vascular Ultrasound Transducer with 3.1-7.9MHz Frequency for Small Parts, Peripheral Vascular,

Knowledge Point

The GE 9L-D is a linear transducer designed for use with advanced GE console ultrasound machines, including the premium Logiq and Vivid series ultrasound machines. It has a frequency range of 2.4-10.0 MHz and has also been designed to be compatible with commercially available contrast agents. It has a generous footprint of 14 x 53mm. You can purchase a GE 9L-D sensor in good condition from Rongtao Medical.

Parts of GE probes we can offer:

Warnings and cautions of ultrasonic probe

★The ultrasonic probe is a valuable piece of equipment. Be careful when using it. Protect the sensor from falling, impact or wear.

★When installing or disassembling the probe, turn off the power first and then operate carefully.

★Avoid rapid and extreme temperature changes, as well as prolonged exposure to direct sunlight or strong ultraviolet light sources.

★Do not use sharp objects to pierce the acoustic lens. Once the acoustic lens is damaged, the coupling glue can easily enter the probe and damage the piezoelectric element.

★Do not immerse the sensor in liquids exceeding the level recommended in the system user manual, please follow the manufacturer's instructions, otherwise it may cause circuit failure or even burn out.

★Do not sterilize at high temperatures, as the probe is equipped with piezoelectric ceramics, and high temperatures will weaken the effect.

★Before use, carefully check whether the shell and cable are damaged to prevent the probe from being damaged by high voltage.

★After using the probe, the coupling glue remaining on the probe must be wiped clean to prevent mice or other animals from chewing the lens.