Profiler Surface Contour Measurement Machine

Features:

The best balance of performance and cost, with the best price/performance ratio.

★ High precision digital contour sensor.

★ Large-scale high-precision contour measurement, micro-profile measurement.

★UNIMETRO innovatively uses a new type of digital sensor that delivers up to five times better linear accuracy than traditional digital encoder sensors and up to 10 times the ability to measure small contours!

★This measure enables the new SP2000 series profiler to meet the requirements of large-scale measurement while also evaluating the small contour of the surface of the part. Typical applications include deep groove ball bearings, peach dog bearings, and ball screw grooves. Measurement of the R value, configuration deviation, and Pt value.

Profiler Surface Contour Measurement Machine Measuring Functions

● Dimensions: including horizontal distance, vertical distance, linear distance, radius and diameter

● Included angle: including horizontal angle, vertical angle and included angle

● Position tolerance: including parallelism and perpendicularity

● Shape tolerance: including straightness, convexity and arc profile

● Auxiliary generation: including auxiliary points, auxiliary lines and auxiliary circles

Profiler Surface Contour Measurement Machine Measuring Range

Profiler Surface Contour Measurement Machine Techinical Specifications

Note: 1. H is the measurement height in the horizontal position; 2. The included angle of the sampling arc is 120 ° for the standard ball of 2mm < R < 10mm; 3. The sampling length of the corner edge is 5mm for the angle block of 60 ° and 90 ° respectively; 4. The λ C is 2.5mm, and the measurement speed is ≤ 0.3mm/s; 5. For the standard ball with 2mm < R < 10mm, the included angle of circular arc is 120 ° 6. The above parameters are measured under the environment of 20 ℃ ± 5 ℃ and the step temperature is not more than 2 ℃ / h 7. The maximum ground vibration RMS < 50 Hz 2.5 μ M / S / > 50 Hz 5.0 μ M / s.

Profiler Surface Contour Measurement Machine Configuration

Machine:

Integrated ergonomic machine cp-mp2

Specification: 500 * 800

Column:

High speed column cp-cn-wr

Maximum moving speed: 15mm / S

Minimum moving speed: 0.2mm/s

Positioning accuracy: 0.005mm

Low noise driver cp-d-ssom

Contour straightness: 0.3 μ M / 100 mm

Roughness residual value: ≤ 0.005 μ M

Maximum moving speed: 15mm / S

Minimum moving speed: 0.05mm/s

Sensors:

Low noise digital contour sensor cp-ztr-chpd

Linear accuracy: ± (0.7 + | 0.05h |) μ m

Measuring force: 0.7g

UNIMETRO Company Information




FAQ:
Q: Are you a factory or trading company ?
A: We are a factory and giving you the quickest reply in 24 hours.