Hybrid PV Energy Storage Rack Mount Off Grid Solar Inverter
Product Instruction:
HT series is a new hybrid PV energy storage inverter controller integrating PV energy storage, mains charging
and storage and AC sine wave output. Using DSP control through advanced control algorithms, it comes with high
response speed, high reliability, high industrialization standard and other characteristics. Four charging modes are
available: only PV, mains priority, PV priority, and hybrid charging by mains&PV; two output modes: inverter and
mains are available to meet different application needs. The PV charging module employs the latest optimized
MPPT technology to quickly track the maximum power point of the PV array in any environment and obtain the
maximum energy of the PV panel in real time.
Key Feature:
1. Full digital voltage; current double closed loop control, combined with advanced SPWM technology to output
pure sine wave.
2. Two output modes: mains bypass and inverter output enable uninterrupted power supply.
3. 4 charging modes are available for choice: only PV, mains priority, PV priority, and hybrid charging.
4. AdvancedMPPT technology with efficiency up to 99.9%.
5. LCD screen design, with 3 LED indicators, for dynamic display of system data and run status.ON/OFF rocker
switch controls AC output.12. Horizontal installation facilitates cabinet combination installation. Lithium battery
can be activated by both mains and PV panel.
7. Power saving mode reduces no-load loss.
8. Intelligent variable speed fan ensures efficient heat dissipation, and thereby extends system life.
9. Double lithium battery activation modes: mains and PV, and supports lead-acid battery and lithium battery
access.
10. Multiple protections provide 360 ° all-round protection for the system.
11. Complete protections include multi-electrical appliance air switch short circuit protection, overvoltage and
undervoltage protection, overload protection, back-flow protection, etc.
Specification Reference:
Model | HT4830S80-145 | HT4840S80-145 | HT4850S80-145 | HT4825U80-145 | HT4830U80-145 | HT4835U80-145 |
Mains mode | ||||||
Rated input voltage | 220/230Vac | 110/120Vac | ||||
Input voltage range | (170Vac~280Vac) ±2% (90Vac-280Vac)±2% | (90Vac~140Vac) ±2% | ||||
Frequency | 50Hz/ 60Hz (automatic detection) | |||||
Frequency range | 47±0.3Hz ~ 55±0.3Hz (50Hz); 57±0.3Hz ~ 65±0.3Hz (60Hz); | |||||
Inverter mode | ||||||
Output voltage waveform | Pure sine wave | |||||
Rated output power (VA) | 3000(2600/2700 /3000) | 4000(3480/360 3800/4000) | 5000(4350/4500 /4800/5000) | 2500(2000/2180 /2290) | 3000(2500/2600 /2750) | 3500(2900/3000 /3200) |
Rated output power (W) | 3000(2600/2700 /3000) | 4000(3480/360 3800/4000) | 5000(4350/4500 /4800/5000) | 2500(2000/2180 /2290) | 3000(2500/2600 /2750) | 3500(2900/3000 /3200) |
Rated output voltage (Vac) | 230Vac(200/208/220/240Vac Settable) | 120Vac(100/105/110Vac Settable) | ||||
Output voltage error | ±5% | |||||
Output frequency range (Hz) | 50Hz ± 0.3Hz 60Hz ± 0.3Hz | |||||
Peak power | 6000VA | 8000VA | 10000VA | 4000VA | 4500VA | 5000VA |
Loaded motor capacity | 2HP | 3HP | 4HP | 1HP | 2HP | 2HP |
AC charging | ||||||
Battery type | Lead acid or lithium battery | |||||
Maximum charge current | 0-60A | 0-40A | ||||
Charge current error | ± 5Adc | |||||
Charge voltage range | 40 - 58Vdc | 40 - 60Vdc | ||||
Short circuit protection | Circuit breaker | |||||
Circuit breaker specification | (AC IN) 63A/(BAT) 125A | |||||
Overcharge protection | Alarm and turn off charging in 1 minute. | |||||
PC charge | ||||||
Maximum PV open circuit voltage | 145Vdc | |||||
PV operating voltage range | 60-145Vdc | |||||
MPPT voltage range | 60-115Vdc | |||||
Battery voltage range | 40-60Vdc | |||||
Maximum output power | 4200W | |||||
PV charge current range (settable) | 0-80A | |||||
Charge short circuit protection | BAT circuit breaker and fuse | |||||
Wiring protection | Reverse polarity protection | |||||
Hybrid charging Max charger current specifications (AC charger+PV charger) | ||||||
Max charger current(can be set) | 0-140A | 0-120A | ||||
Certified specification | ||||||
Operating temperature range | -15°C to 55°C | |||||
Storage temperature range | -25°C ~ 60°C | |||||
RH range | 5% to 95% (conformal coating protection) | |||||
Noise | ≤60dB | |||||
Heat dissipation | Forced air cooling, adjustable air speed | |||||
Communicat ion interface | USB/RS485 (WiFi/GPRS)/Dry Node Control | |||||
Dimensions (L*W*D) | 482*425*133mm | |||||
Weight (kg) | 13.3 |
Operating Mode:
Charging mode:
1. PV priority: 2. Mains priority:
3.Hybrid charging: 4. Only Solar:
Output mode:
1.PV priority mode:
2.Mains priority mode:
3.Inverter priority mode:
Remark:
Warning: risk of electric shock! Make sure all power supplies are disconnected from the all-in-one machine and
the capacitor is completely discharged before performing any checks or operations!