Nickel Plated 15Pin VGA Cable With Double Ferrite Cores For PC and Projector
Description:
* VGA Cable is used for transimitting analog video signals from a VGA enabled device such
as a projector or computer to a monitor.
* Some high definition televisions use this type of cable as well.
* It's characterized by 15 pins on the plug in three rows of five. The plug also has two screws, one either side of the pins, that secure it into place
in the socket. These screws have ridged edges, meaning they can be tightened and loosened by hand rather than needing a screwdriver.
VGA Cable Specification:
* Rated Temperature: 80C. Rated Voltage: 30Volts
* RGB 3Coaxial Cable Single wire each individually and drain wire, AL-Mylar shielded
Conductor: | 30~28AWG Stranded orSolid Coppeer |
Insulation: | Foamed PE+Skin (Chemical Foam) |
Drain Wire: | 30-28AWG Stranded orSolid Copper |
Covering: | Polyvinyl Chloride (PVC) |
* Single Wire: (4~9C)
Conductor:30-28AWG Stranded orSolid Copper
Insulation: Polyethylene (HD-PE)
* Inner shielded: AL-Mylar 100% (min) coverage
* Drain Wire: 30-28AWG Stranded orSolid Copper
* Outershielded: CopperorAL-MG braid (Converage: 45%/65%/85%)
* Jacket: Polyvinyl Chloride (PVC)
* Outside Diameter: 6.0/8.0mm (May decide according to the request)
* Color: Black (May decide according to the request)
Applications:
*PC, CRT/LCD/LED Monitor Display, Projector etc.