4M50 Diesel Used Fuel Injector For Excavator HD820V ME223750

Specification

Description

Turn the Car On

This is where it gets a little tricky. Turn your car on, but before you do this, be 100 percent certain that the fuel pump is off and then engage. The cleaner from your kit will begin to run through the engine. Within five to ten minutes, the engine will shut down when the cleaner has run its course. After this point, remove the cleaner tube.

Easy Three-Step Process for Less Invasive Use

If you’re not too keen under the hood, or you just want to give your car a little TLC, you can still use some formulas of fuel injector cleaners without having to dissect an area of your car that you’re not familiar with.

1. Ensure Your Tank is Nearly Empty

You don’t want to dilute your solution in a full gas tank; ensuring that you have one gallon of gas or less is crucial to using this method.

2. Use the Appropriate Amount of Injector Cleaner

This is going to depend on the capacity of your gas tank. This is a good time to grab your owner’s manual and give it a read. Carefully read the instructions for the cleaner you’ve chosen, and match the recommended amount to the size of your tank.

3. Empty

Put the contents of your fuel injector cleaner of choice into the tank, add your regular fuel (this will push the cleaner through your injectors upon next startup), and you’re good to go.

Can Fuel Additives Help my Injectors?

Fuel additives can be helpful for numerous reasons, but if you’re storing your car for a long period of time — especially if you’re a proud owner of a vintage car that rarely comes out from under the tarp — you’ll want fuel injector additives.

These prolong the life expectancy of your fuel/oil, so you won’t have to worry about buildup or long-term corrosion. Fuel additives help keep your injectors lubricated and ready to go when you are.