Item | Specification |
Authentication and security | ● Advanced Encryption Standard (AES) for Wi-Fi Protected Access 3 (WPA3), WPA2, WPA ● 802.1X, RADIUS Authentication, Authorization and Accounting (AAA) ● 802.11r ● 802.11i |
Software | ● Cis Unified Wireless Network Software with AireOS Wireless Controllers Release 8.4.100.0/84 CCO or later ● Cis Mobility Express |
Supported WLAN controllers | ● Cis 2500 Series Wireless Controllers, Cis 3500 Series Wireless Controllers, Cis Wireless Controller Module for ISR G2, Cis Wireless Services Module 2 (WiSM2) for Catalyst ® 6500 Series Switches, Cis 5500 Series Wireless Controllers, Cis Flex ® 7500 Series Wireless Controllers, Cis 8500 Series Wireless Controllers, Cis Catalyst ® 9800 Series Wireless Controllers ● Cis Mobility Express |
Maximum clients | ● Maximum number of associated wireless clients: 200 per Wi-Fi radio, in total 400 clients per access point |
802.11ac | ● 2x2 single-user/multiuser MIMO with two spatial streams ● Maximal Ratio Combining (MRC) ● 20-, 40-, and 80-MHz channels ● PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz) ● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx) ● 802.11 Dynamic Frequency Selection (DFS) ● Cyclic Shift Diversity (CSD) support |
Ethernet ports | ● Authentication with 802.1X or MAC filtered ● Dynamic VLAN or per port ● Traffic locally switched or tunneled back to wireless LAN controller |
Bluetooth (future availability) | ● Integrated Bluetooth 4.1 (including BLE) radio ● Maximum transmit power: 4 dBm ● Antenna gain: 2 dBi |
Integrated antennas | ● 2.4 GHz, gain 2 dBi ● 5 GHz, gain 3 dBi |
Interfaces | ● 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE) ● Management console port (4-pin connector) ● Three 10/100/1000BASE-T ports (local Ethernet ports), including one PoE out port: ◦ PoE out provides 802.3af (class 0) when access point is powered by 802.3at, or no output when powered by 802.3af ● One passive pass-through port RJ-45 (back to bottom) |
Indicators | ● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors |
Dimensions(W x L x H) | ● Access point (without mounting bracket): 3.5 x 5.5 x 1.25 in (89 x 140 x 31.5 mm) |
Weight | ● Access point without mounting bracket or any other accessories: 10 oz (280 g) |
System | ● 1 GB DRAM ● 256 MB flash ● 710 MHz quad-core |
Powering options | ● 802.3af/at Ethernet switch ● Optional Cisco power injectors (AIR-PWRINJ5=, AIR-PWRINJ6=) |
Power draw | ● 8.5W (maximum, without PoE out) |
Physical security | ● Torx security screw, included with the access point ● Kensington lock slot to lock device to mounting bracket. |
Mounting | ● Included with the access point: mounting bracket AIR-AP-BRACKET-W3 |
Accessories | ● Mounting bracket: AIR-AP-BRACKET-W3= (available as spare) ● Spacer kit: AIR-AP1815W-KIT= (sold separately), includes spacer and RJ-45 jumper cable ● Physical security kit: AIR-SEC-50= (sold separately), with 50 pcs. security screws used to secure the access point onto wall-mounting bracket, 20 pcs. RJ-45 caps and 2 pcs. unlock keys used to block physical access to Ethernet ports |