1 | Forty-eight 10/100/1000BASE-T ports | 2 | Four 10GE SFP+ ports Applicable modules and cables: · GE optical module · GE-CWDM optical module · GE-DWDM optical module · GE copper module · 10GE SFP+ optical module (OSXD22N00 not supported) · 10GE-CWDM optical module · 10GE-DWDM optical module (applicable in V200R009C00 and later versions) · 1 m, 3 m, and 10 m SFP+ high-speed copper cables · 5 m SFP+ high-speed copper cable (applicable in V200R009C00 and later versions) · 3 m and 10 m AOC cables · 0.5 m and 1.5 m SFP+ dedicated stack copper cables (used for zero-configuration stacking, supported in V200R011C10 and later versions) |
3 | One ETH management port | 4 | One mini USB port |
5 | One console port | 6 | One USB port |
7 | Ground screw NOTE: It is used with a ground cable. | 8 | ESN label NOTE: You can draw it out to view the ESN and MAC address of the switch. |
9 | Rear card slot 1 NOTE: This slot is reserved for future use. | 10 | Rear card slot 2 NOTE: Card supported: ES5D21X04S01 (4-Port 10 GE SFP+ Rear Interface Card) |
11 | Power module slot 2 NOTE: Applicable power modules: · 350 W DC power module · 600 W AC power module | 12 | Power module slot 1 NOTE: Applicable power modules: · 350 W DC power module · 600 W AC power module |
Item | Description |
Memory (RAM) | 4 GB |
Flash | 512 MB in total. To view the available flash memory size, run the display version command. |
Power supply surge protection | · Using AC power modules: ±6 kV in differential mode, ±6 kV in common mode · Using DC power modules: ±1 kV in differential mode, ±2 kV in common mode |
Dimensions (H x W x D) | 44.4 mm x 442.0 mm x 420.0 mm (1.75 in. x 17.4 in. x 16.5 in.) |
Weight (with packaging) | 10 kg (22.05 lb) |
Stack ports | Four fixed 10GE SFP+ ports on the front panel or ports on the 4-port 10GE SFP+ rear interface card NOTE: The switch supports service port stacking since V200R009C00. |
RTC | Supported |
RPS | Not supported |
PoE | Not supported |
Rated voltage range | 100 V AC to 240 V AC, 50/60 Hz -48 V DC to -60 V DC |
Maximum voltage range | 90 V AC to 264 V AC, 47 Hz to 63 Hz -38.4 V DC to -72 V DC |
Maximum power consumption (100% throughput, full speed of fans) | 183.3 W |
Typical power consumption (30% of traffic load) · Tested according to ATIS standard · EEE enabled · No PoE power consumption | 128.93 W |
Part number | 02358598 |